DGUS-reloaded VS DGUS-reloaded-Klipper

1) the firmware on my touchscreen is still the best/latest available since last year when i got it all working? https://github.com/Desuuuu/DGUS-reloaded version 1.0.2?

Here you go. Use at your own risk. I will not maintain this firmware this is for your or anybody to use. This is bone stock without a bltouch/crtouch or any bed probe for that matter using marlins Ender 6 config examples for 2.1.2. the screen firmware is Reloaded for DWIN_SET TUID5 (Ender 6) screens. You can see the github at https://github.com/Desuuuu/DGUS-reloaded/releases

Yes you do here you go https://github.com/Desuuuu/DGUS-reloaded

16 hours of research and i solve it. So, if you have same issue you need file which will erase the touchscreen onboard memory before the flashing process starts, I don't know why the same file in creality DWIN_SET don't do that, but it's fact. File name: T5UID1.CFG

Link to DGUS-reloaded

Anyways, I decided to just start over and try again. Pulled fresh Marlin 2.1.x repository and Desuuuu's DGUS repo as well - configured Marlin for DGUSLCD_UI_RELOADED, chased the GRID_MAX_POINTS* errors down, and uploaded it.

I'll reply to this with it once with the guide is complete. If you want to rush it, follow the instructions on here to flash a mandatory update to your stock LCD first - https://github.com/Desuuuu/DGUS-reloaded/wiki/Flashing-the-T5-GUI-and-OS-firmware

There is an option in the marlin called: ‘DGUS_LCD_UI_RELOADED’ which you should enable. And you need this firmware for the screen: https://github.com/Desuuuu/DGUS-reloaded/wiki

The stock screen needs this klipper fork and their screen firmware https://github.com/Desuuuu/DGUS-reloaded-Klipper

I have the stock screen install currently. While it works with a modified version of Klipper (https://github.com/Desuuuu/DGUS-reloaded-Klipper), that release is 2-3 years old now. I use vanilla Klipper so that I can can stay up to date with the latest releases. I don't find much use to a screen because my computer is near my printer and I just use Fluidd (or Mainsail, or Octoprint, etc.).

I’m running it on all three of mine. It works well. There is nice firmware for the screen available from Desuuuu on GitHub. https://github.com/Desuuuu/DGUS-reloaded-Klipper

.https://github.com/Desuuuu/DGUS-reloaded-Klipper

There is an old, now quite outdated, attempt at supporting the Ender 3 v2 touchscreen on Klipper through a fork. But that has not been updated in quite a while and it never really worked well enough to actually use in the first place. I strongly recommend you don't try to use that fork, but if you do you will need to recompile and re-flash the firmware as it uses an older version of Klipper. Again, this has not been updated in over a year. Do not try to use it.

With klipper i use https://github.com/Desuuuu/DGUS-reloaded-Klipper Shows temperatures and progress, i like it.