Rc-switch Alternatives

rc-switch reviews and mentions

• Looking to make a wireless mic button for Walkie-talkie, do they make a receiver that can be wired into a button, or do I need an arduino on each side?
  1 project | /r/arduino | 13 Apr 2023
• RF module Fs1000A with Stm32
  2 projects | /r/embedded | 21 Dec 2022

  It really depends too on what the transmitter is sending, do you have any information on the transmitter device? You can try rc-switch which supports interpreting multiple protocols/timings: https://github.com/sui77/rc-switch

• Help please: Listening to 433mhz with RC-Switch but not getting any serial output
  4 projects | /r/arduino | 9 Oct 2022

  According to https://github.com/sui77/rc-switch Rc-Switch says they support the following chipsets:

• I can't get the 433MHz rf receiver to work, it just spits out "random" pulses.
  1 project | /r/arduino | 4 Oct 2022
• Anyone know how to hook up these physical buttons so they can be triggered by an ESP32?
  1 project | /r/esp32 | 20 Jul 2022
• 315mhz receiver advice
  1 project | /r/arduino | 10 Jun 2022

  According to the output from https://github.com/sui77/rc-switch/, the protocol is 11, which correlates to HT12E.

• I need help figuring out why I can’t clone the rf signal from the Arduino (rf sender) to the remote. I am using the SendDemo example from rc-switch library
  1 project | /r/arduino | 16 Mar 2022

  /* Example for different sending methods https://github.com/sui77/rc-switch/ */#include RCSwitch mySwitch = RCSwitch();void setup() { Serial.begin(9600); // Transmitter is connected to Arduino Pin #10 mySwitch.enableTransmit(10); // Optional set protocol (default is 1, will work for most outlets) mySwitch.setProtocol(1); // Optional set pulse length. mySwitch.setPulseLength(370); // Optional set number of transmission repetitions. // mySwitch.setRepeatTransmit(15); }void loop() {/* using decimal code */ mySwitch.send(16736113, 24); delay(350); //mySwitch.send(5396, 24); //delay(1000); ;}

• simple R/C communication using 433mhz and ATTINY85 [help wanted]
  1 project | /r/arduino | 3 Mar 2022

  -in my esp32 setup i use digitalPinToInterrupt(MyPinNumber) to make it easier to use the correct pin maybe that helps in your case too. -According to the comments here it should be working on the attiny85, maybe you can adapt some of their examples https://github.com/sui77/rc-switch/issues/143 -getReceivedValue() returns an unsigned long for me, maybe there's a conversion problem in your code.

• My uncle recently built a PC and I don’t understand it, was wondering if anyone can take a shot at figuring out how it works. (Sorry, I’m a newbie)
  1 project | /r/pcmasterrace | 5 Feb 2022

  // library from https://github.com/sui77/rc-switch/ # include RCSwitch mySwitch = RCSwitch(); mySwitch.enableTransmit(10); // pin 10 // do your own logic detection, but these send the light commands: mySwitch.send(4853521, 24); // change to white color mySwitch.send(4853524, 24); // blue mySwitch.send(4853523, 24); // red

• Control radio controlled switches with a raspberry pi pico
  3 projects | /r/raspberry_pi | 23 Oct 2021

  Hi reddit, I just ported the awesome rc-switch library to the raspberry pi pico, so now you can control radio controlled switches using cheap 433Mhz radio modules. Previously it only worked on arduinos and raspberry pis. Check it out

• A note from our sponsor - InfluxDB
  www.influxdata.com | 5 May 2024

  Get real-time insights from all types of time series data with InfluxDB. Ingest, query, and analyze billions of data points in real-time with unbounded cardinality. Learn more →