OneWire Alternatives

OneWire reviews and mentions

• Temperature monitor for a small greenhouse
  5 projects | /r/arduino | 30 Jun 2023

  https://github.com/PaulStoffregen/OneWire (for the sensor)

• Unique ID for Arduinos?
  1 project | /r/arduino | 23 Mar 2023

  Try looking into the Analog Devices (formerly Maxim, formerly Dallas Semi) DS2401+. Paul Stoffregren's OneWire library should work.

• DS18B20 isolating problem. I have 4 of these on my breadboard and the code runs fine. One in my fridge, freezer, outside and inside. When I attach them to cables and insert them into the environments, they get reassigned to different 'zones'. How can I force each one to a 'zone'?
  1 project | /r/arduino | 13 Feb 2023

  Each One Wire device (OWD) has a unique, 64-bit (8-byte) ID that is used to address that particular device. Have a look at the DS18x20 temperature sensor example. You'll see that a search for devices is done. If one is found, its address is stored in a 8-byte array.

• Connection to ThingSpeak Failed ..
  1 project | /r/arduino | 30 Oct 2022

  // OneWire DS18S20, DS18B20, DS1822 Temperature Example // // http://www.pjrc.com/teensy/td_libs_OneWire.html // // The DallasTemperature library can do all this work for you! // http://milesburton.com/Dallas_Temperature_Control_Library #include #include #include // Enter a MAC address and IP address for your controller below. // The IP address will be dependent on your local network: byte mac[] = {   0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; IPAddress ip(192, 168, 1, 70); // ThingSpeak Settings char thingSpeakAddress[] = "api.thingspeak.com"; String writeAPIKey = "xxxxxxxxxxxxxxxxxxxx"; const int updateThingSpeakInterval = 16 * 1000;      // Time interval in milliseconds to update ThingSpeak (number of seconds * 1000 = interval) // Variable Setup long lastConnectionTime = 0; boolean lastConnected = false; int failedCounter = 0; // Initialize Arduino Ethernet Client EthernetClient client; // Initialize the Ethernet server library // with the IP address and port you want to use // (port 80 is default for HTTP): EthernetServer server(80);

• 1-Wire unknown any information
  1 project | /r/diyelectronics | 10 Mar 2022

  There is SWI (Single wire interface) by Atmel for example. The 1-wire protocol is a specific standard. Not sure what standard this chip uses. It probably is 1-wire. Try this https://www.pjrc.com/teensy/td_libs_OneWire.html

• Has anyone got CapacitiveSensor libarary to work on ESP32?
  2 projects | /r/esp32 | 26 Dec 2021

  Paul has other libraries one of which is called OneWire. Apparently we are looking at adding supporting lines similar to the entries in the header files held here

• I have this EPROM chip I want to reprogram but have no idea where to start. The chip is DS24B33 and it is storing a percentage as far as I’m aware, any help or guidance appreciated
  1 project | /r/AskElectronics | 23 Jun 2021

  https://github.com/PaulStoffregen/OneWire for example

• Need help with a DS18B20 thermometer connecting to an ARM board
  1 project | /r/ECE | 29 Mar 2021

  OneWire.h header file for DS18B20 on Arduino

• Need help. Get error on "OneWire oneWire(ONE_WIRE_BUS);" stating that; "no matching function for call to 'OneWire::OneWire(int)' ". WTF IS GOING ON!?
  1 project | /r/arduino | 1 Feb 2021

  Are you not using the standard OneWire library which does have a constructor that takes a pin as an argument ?

• A note from our sponsor - SaaSHub
  www.saashub.com | 17 May 2024

  SaaSHub helps you find the best software and product alternatives Learn more →