-
KlipperWrt
A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.
-
InfluxDB
Power Real-Time Data Analytics at Scale. Get real-time insights from all types of time series data with InfluxDB. Ingest, query, and analyze billions of data points in real-time with unbounded cardinality.
On a Laptop, log into the Printers Wifi (It will be named CXSWBox-12345678ABCDEF or similar), the password is "12345678". You will get an IP address via DHCP. The Wifi Boards web interface is reachable at 10.10.10.254 with username "admin" and password "admin". Go to Administration > Upload Firmware. Choose one one of the -factory images at https://github.com/ihrapsa/KlipperWrt/tree/main/Firmware/OpenWrt_snapshot, depending if you want to run fluidd or mainsail (Comparison is here: https://www.youtube.com/watch?v=BHVVcjtWTyA). Upload the image, you will get a message "Not a valid firmware". Go to http://10.10.10.254/adm/system_command.shtml and enter mv /var/tmpFW /media/mmcblk0p1/cxsw_update.tar.bz2 and for the next command reboot. Then wait for a KlipperWrt Wifi to show up. Connect to it, use the static IP 192.168.1.23 with netmask 255.255.255.0. The web interface is available at 192.168.1.1:81.
My PR of the config is here: https://github.com/Klipper3d/klipper/pull/5396