A beginner's resource guide to setting up and fine tuning the Elegoo Neptune 3 Pro/Plus/Max with Klipper and Inovato Quadra (or pi alternative)

• Klipper-for-Elegoo-Neptune-series-3D-Printers

  8 152 6.5

  run Klipper on your neptune 2, 2s, 3, 3pro, etc!

Download the bin and printer cfg file from u/TheFeralEngineer's github page here. It should be the one for USB connection.

• kiauh

  341 2,917 7.6 Shell

  Klipper Installation And Update Helper

cd ~ git clone https://github.com/th33xitus/kiauh.git ./kiauh/kiauh.sh

• WorkOS

  workos.com sponsored

  The modern identity platform for B2B SaaS. The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning.

  

• PrusaSlicer

  395 7,348 9.9 C++

  G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)

  

Since a few people were asking, here are my own prusa settings that I used to print the benchy in my previous post: https://imgur.com/a/NOv4oDp. For those of you that want to switch, you can download the latest release located here which includes default profiles for the 3 pro/plus/max models.

• Cura

  461 5,824 10.0 Python

  3D printer / slicing GUI built on top of the Uranium framework

  

That is not really true. If you have used version 5.3.x, this is a known bug in Cura causing slowdowns on curved surfaces. It can be easily seen in a GCode analyzer - these slowdowns will show as black dots on the surface. See the screenshot below from my Cura-sliced print - the Z-seam is on the very bottom, and yet there are multiple slowdowns (resulting in blobs) on the rest of the surface.

Suggest a related project