Our great sponsors
-
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine. (by alexqzd)
-
WorkOS
The modern identity platform for B2B SaaS. The APIs are flexible and easy-to-use, supporting authentication, user identity, and complex enterprise features like SSO and SCIM provisioning.
-
Marlin-Alex
Discontinued Firmware mainly for Voxelab Aquila or Creality Ender w/ 4.2.7 board or G32/N32 chips
I could not find this guide to compile the firmware for it, could you link to it? It may be the pins of the CPU are wired up to different things on the aquila board and you need to define them properly. As you have the STM32 then there should not be any other changes to look out for unlike the other chips. You could compare the configuration files with Alex's to see if you have missed anything.
here u go
look for this file here voxelab_aquila_Default-NP-G32-C2.bin