whopping_Voron_mods VS Voron-Tap

Rainbow Barf SB LED Logo with Linneo Black LED diffuser

The bracket goes in the back like shown here

The mounts are the Whoppingpochard design.

I built a 300, and I can see the bi-metal extrusion warping without gantry backers that seems to be the biggest concern with going larger. (https://github.com/tanaes/whopping_Voron_mods/tree/main/extrusion_backers)

Insufficient heat soaking. As the chamber warms up the frame members deflect from thermal expansion, causing the toolhead to rise. In my experience you need a good hour or so with the doors closed for temperatures to stabilize enough, on a stock build. Putting backers on the Y rail extrusions can mitigate this as well: https://github.com/tanaes/whopping_Voron_mods/tree/main/extrusion_backers

The Bambu Lab CoreXY printers have force sensors in the bed for leveling using the nozzle: https://wiki.bambulab.com/en/x1/maintenance/replace-the-heat...

Vorons also have a nozzle probing design: https://github.com/VoronDesign/Voron-Tap

There definitely is a popular Voron mod that detects bed position (and mesh) by mounting the entire extruder on a rail and having an optical switch - the Voron Tap

Tap RC8

GitHub

The most important Rails on a Voron are the three rails used for X, Y, and if present Tap.

\)Except for the manual

I'm currently setting up a BTT EBB36 V1.2 for use with Voron TAP but am having some issues getting the Optical Switch to show up as Triggered when Querying it from within Fluidd OS.