udm-host-records VS udm-telus

Turns out on the UDM line, if you can't manage it in the UI, then you can't mange it (no support for config.gateway.json). In this case I'm pretty sure you're out of luck in the UI. There are some scripts out there you can find to do this, but the records may not survive reboots and/or firmware upgrades. https://github.com/evaneaston/udm-host-records

Hi Everyone, first time post here. I have searched and searched but I am just at a loss. Maybe I am just a noob (most likely) but I am adding some scripts to my UDM to get around not having static DNS entries as an option. Walkthrough and scripts here... https://github.com/evaneaston/udm-host-records

If you don't want to use a reverse proxy server, then you can also do it by adding the host records to the DNS server on the UDM (can't do it through GUI, have to do it in SSH). You can use the udm-host-records to do that, or just modify the dnsmasq files manually if you're familiar with dnsmasq and Linux. I would say this isn't as elegant of a solution as the reverse proxy.

this is the tutorial I have used in the past https://github.com/peacey/udm-telus

i was able to watch tv using this: https://github.com/peacey/udm-telus only problem is i cannot use tv provider specific services like purchasing a vod movie without getting private ip straight to the tv box. still good enough for now. thanks for the help!

I've tried all combination of settings from https://www.dslreports.com/forum/r30920470- and https://github.com/peacey/udm-telus to try to get it working, but nothing seems to be good.

Since you're using a UDMP, you can actually get IPTV working directly on the UDMP without needing to use TELUS router. This way you'll only need to use one router and connection from the modem. You just need to install igmpproxy on it to setup multicast traffic. See the guide here.

Not through JSON, but you can install igmpproxy on it and configure it. I used this tutorial to get Telus IPTV working with UDMP.

You still need an igmpproxy, this guide here is very helpful even if you don't have telus: https://github.com/peacey/udm-telus

Here is the link to the tutorial: https://github.com/peacey/udm-telus