u8g2 VS Arduino

Try the https://github.com/olikraus/u8g2/wiki library.

If you want to stick with the u8g2 library, be sure to check out the u8g2 wiki for some more information. There's a lot of info on the setup page and I find the u8g2 reference especially useful in practice.

Check out the U8G2 library if you're going to work with OLED displays. It's really the best one out there and it does it all, supporting multiple OLED displays with the one library. It also has excellent support for numerous fonts in different sizes.

I have been considering two different methods for achieving this. The first method is the one that Olikraus uses with the u8x8 library, which implements a callback system that handles the hardware abstraction layer. The second method that I have been contemplating is using i2cdev, which allows for sharing the i2c port with other threads.

I use the u8x8 library (https://github.com/olikraus/u8g2/wiki/u8x8reference) for the display. I like this library a lot!

Use u8g2, awesome library, very flexible, works with everything.

Try U8G2. It works with both these OLEDs and many more.

For displays like this, I strongly recommend the U8G2 (https://github.com/olikraus/u8g2) library. It has support for pretty much everything. However, you might need to find/write/tweak your own "hal" later, which is just a couple of simple callback functions that bridge it to the I2C or SPI ports of your MCU.

The result is that the WiFiSecureClient doesn't work when used in the bot declaration, so I changed the variable to WiFiClient but I can't use the certificate, so I comment it out and ESP8266.h gives me a thousand errors due to lack of dependencies in its libraries. I should point out that I downloaded the entire project from the Arduino ESP8266, I don't know how to link all the libraries, so I simply took those from the ESP8266WiFi.

#include #include "time.h" #include "sntp.h" char* ssid = "WIFI"; char* password = "w1fi"; const char* ntpServer1 = "pool.ntp.org"; const char* ntpServer2 = "time.nist.gov"; const long gmtOffset_sec = 3600; const int daylightOffset_sec = 3600; const char* time_zone = "CET-1CEST,M3.5.0,M10.5.0/3"; // TimeZone rule for Europe/Rome including daylight adjustment rules (optional) void printLocalTime() { struct tm timeinfo; if(!getLocalTime(&timeinfo)){ Serial.println("No time available (yet)"); return; } Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S"); } // Callback function (get's called when time adjusts via NTP) void timeavailable(struct timeval *t) { Serial.println("Got time adjustment from NTP!"); printLocalTime(); } void setup() { Serial.begin(115200); // set notification call-back function sntp_set_time_sync_notification_cb( timeavailable ); /** * NTP server address could be aquired via DHCP, * * NOTE: This call should be made BEFORE esp32 aquires IP address via DHCP, * otherwise SNTP option 42 would be rejected by default. * NOTE: configTime() function call if made AFTER DHCP-client run * will OVERRIDE aquired NTP server address */ //sntp_servermode_dhcp(1); // (optional) /** * This will set configured ntp servers and constant TimeZone/daylightOffset * should be OK if your time zone does not need to adjust daylightOffset twice a year, * in such a case time adjustment won't be handled automagicaly. */ configTime(gmtOffset_sec, daylightOffset_sec, ntpServer1, ntpServer2); /** * A more convenient approach to handle TimeZones with daylightOffset * would be to specify a environmnet variable with TimeZone definition including daylight adjustmnet rules. * A list of rules for your zone could be obtained from https://github.com/esp8266/Arduino/blob/master/cores/esp8266/TZ.h */ //configTzTime(time_zone, ntpServer1, ntpServer2); //connect to WiFi Serial.printf("Connecting to %s ", ssid); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(" CONNECTED"); } void loop() { delay(5000); printLocalTime(); // it will take some time to sync time :) }

https://github.com/esp8266/Arduino http://arduino.esp8266.com/stable/package\_esp8266com\_index.json https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads

He meant the Arduino framework. There is an Arduino core for the ESP8266 so you can use Arduino’s IDE and libraries for the ESP with this core here

According to this link(https://github.com/esp8266/Arduino/issues/6174) WeMos can't receive broadcasts on SDK 2.2.1.

There are 2 ways to minimize power consumption while maintaining an active WiFi connection, but it's not a large power reduction for either mode. Look at Automatic Modem Sleep and Automatic Light Sleep here: https://github.com/esp8266/Arduino/tree/master/libraries/esp8266/examples/LowPowerDemo

That's the Arduino (Uno) library. If you've correctly installed the ESP8266 package then it should be 3.(something-ish) for the ESP8266 version of the WiFi library. Current is 3.1.1 for the core files, and the WiFi is part of the core libraries. If you have your compile options set for verbose then you should see it doesn't access that old Arduino WiFi library.

Seems it's expected https://github.com/esp8266/Arduino/issues/721