rpi-vk-driver VS apfs-fuse

I was trying to install Vulkan on my Pi3B+ following this link

Even RPi Zero has (unofficial) Vulkan subset https://github.com/Yours3lf/rpi-vk-driver but unfortunately it lacks compute at all (and SPIR-V, GPU semaphore, 32bit indices for fixed graphics pipeline, ...)

"Not being into spec" isn't a problem actually

OR to attempt to recover data from the old drive, you can use a USB and boot into a Linux Live instance, install apfs-fuse to mount the partition if it is not encrypted. Here's a tutorial to boot into Ubuntu Live. And here is a link to the github repository for apfs-fuse.

There is a WIP Linux fuse based driver on GITHUB (here).

Also potentially useful: apfs-fuse and apfsprogs.

PS: there's apparently an apfs-fuse module out there (read-only though) if you want to copy files from OSX to Linux, although I know nothing about how reliable it is.

i'd try booting a live linux environment and using apfs-fuse , easiest with an arch based distro, recommend manjaro and using AUR to install it.

Assuming you're running High Sierra or later, though, reading the drive on anything other than macOS is gonna take a bit of know-how, because it'll be APFS-formatted, and there just isn't much support for APFS on other platforms currently. You'll need to run Linux and compile apfs-fuse in order to mount the drive.

If the SSD is soldered to the logic board you might be screwed since you can't boot into Target Mode. However, for what it's worth, I yanked the SSD out of an older MBP that tanked and successfully mounted it as read-only on my Linux machine via apfs-fuse. This despite the fact that my wife's 2019 MBA with Big Sur couldn't mount or fix it.