redox-keyboard VS qmk_firmware

Use 3 of those YJ-14015 modules (e.g. https://github.com/mattdibi/redox-keyboard/tree/master/redox-w) with a Pro Micro Q2: Is there a way to generate the PCB for this with ergogen or do I have to wing it in KiCad?

After some initial research, I've found a couple of models that seem to meet my requirements: the Lily58 and Redox-w v2.

There's a website that has a bunch of split keyboard layouts you can print out at full scale and sort of test drive really easily. I did that and found I didn't like the moonlander or ergodox thumb clusters, which is why I went with a Redox instead.

It's just a remix of the original case. Mattdibi also included the STEP and fusion360 file. What I changed on that case: Add a cavity for a 503035 battery, Add a ~3 degrees tilt for the battery and Hex insert for the nuts, making it much easier to assemble / disassemble.

If you want more of a full-size, five-row configuration, get a Redox PCB from Falbatech or Beekeeb.

To anyone who is here in 2 years looking to find a good case the soldered PCB is listed on the official GitHub ( https://github.com/mattdibi/redox-keyboard) as the Redox rev1. 0W. This is the soldered version and is the exact same as the one sold on falba tech and is compatible with the official case found here: https://github.com/Pastitas/Redox-neodox-Case.

I agree that reduced finger movement is a crucial step in achieving typing efficiency. This is nicely solved by mod tap modifiers in QMK/ZMK[1] where key acts as a char when tapped and as a layer while pressed.

[1]: https://github.com/qmk/qmk_firmware/blob/master/docs/mod_tap...

Separate wireless controller, see the glue code at [0]

[0]: https://github.com/qmk/qmk_firmware/compare/master...nuphy-s...

If you have a keyboard that runs QMK firmware[0] with the VIA[1] feature enabled[2], then there is a convenient testing app available from the same place you customize your keys [3].

[0] https://qmk.fm/

I made a layout that I'm happy with. Spanish is my native language, so it has characters like the accents and 'ñ', but it's meant to be used for programming as well. Visual Studio uses a lot of Ctrl and Ctrl + Shift shortcuts, so I left them in the same place as the default Corne layout so I can press them both with my pinkie finger. Perhaps some of the ideas are useful to you.

Also, it would be possible to do this for the RP2040. However, it needs some work to get working. but for example: https://github.com/qmk/qmk_firmware/pull/20999

Ok, it's an ST7735, not too different from the ST7789. You should be able to get running by looking at their files in the QMK repo and going from there. You should also check their resources page.

UPDATE: after fluffing around a little bit, I have manged to fix this code: https://github.com/qmk/qmk_firmware/blob/master/keyboards/lily58/keymaps/bongocat_wpm_responsive/keymap.c and flash it successfully - it seems not to be working correctly as the cat is only hanging there and does not respond to the wmp count. If anybody spots anything wrong in the code please let me know!(C is not my language but I am a programmer, I am gonna get at it again over the weekend if I have time left)