qmk_firmware VS pico-examples

Separate wireless controller, see the glue code at [0]

[0]: https://github.com/qmk/qmk_firmware/compare/master...nuphy-s...

If you have a keyboard that runs QMK firmware[0] with the VIA[1] feature enabled[2], then there is a convenient testing app available from the same place you customize your keys [3].

[0] https://qmk.fm/

I made a layout that I'm happy with. Spanish is my native language, so it has characters like the accents and 'ñ', but it's meant to be used for programming as well. Visual Studio uses a lot of Ctrl and Ctrl + Shift shortcuts, so I left them in the same place as the default Corne layout so I can press them both with my pinkie finger. Perhaps some of the ideas are useful to you.

Also, it would be possible to do this for the RP2040. However, it needs some work to get working. but for example: https://github.com/qmk/qmk_firmware/pull/20999

Ok, it's an ST7735, not too different from the ST7789. You should be able to get running by looking at their files in the QMK repo and going from there. You should also check their resources page.

UPDATE: after fluffing around a little bit, I have manged to fix this code: https://github.com/qmk/qmk_firmware/blob/master/keyboards/lily58/keymaps/bongocat_wpm_responsive/keymap.c and flash it successfully - it seems not to be working correctly as the cat is only hanging there and does not respond to the wmp count. If anybody spots anything wrong in the code please let me know!(C is not my language but I am a programmer, I am gonna get at it again over the weekend if I have time left)

For Seniply I've found this implementation for a_dux keyboard: QMK

Navigate to the Pico Examples repository.

I'm experimenting with the "pico/wifi/tcp_server/". It works as expected with a WPA2 secured network, however I can't figure out how to access a WP3 secured network. According to the Pico W datasheet the device supports WPA3. However the function cyw43_arch_wifi_connect_async doesn't seem to have the option to select WPA3. The supported options are CYW43_AUTH_WPA_TKIP_PSK, CYW43_AUTH_WPA2_AES_PSK, or CYW43_AUTH_WPA2_MIXED_PSK.

I connected the MPU6050 and Pico as shown in the wiring guide for the example code here and have also tried using a level shifter with this wiring setup.

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Okay I abandoned both of those libraries and tried the simpler WS2812 example in the Pico SDK and I did get it working....finally.

For C++, you could look at the pico-examples on Github https://github.com/raspberrypi/pico-examples

I don't know what you mean. There are dozens of tutorials on the frontpage of google. And just straight up a bt folder of projects for the pico w in the rpi github at https://github.com/raspberrypi/pico-examples/tree/master/pico_w/bt. have you tried that? If you haven't, then you need to work on learning how to use google because people aren't here to do work for you. If you have tried this and it didn't work then reread my previous post and ask better questions.

I'm sorry I don't use the pico-sdk so I'm not 100% sure of which method it'd be. A short lookup in the pico-examples repository brought me to this.

The LED is controlled by a GPIO pin on the radio, not the RP2040. See https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/blink/picow_blink.c.