readerwriterqueue VS linux

I have looked at the commonly recommended - https://github.com/cameron314/readerwriterqueue - https://github.com/rigtorp/MPMCQueue

The PREEMPT error looks like its a C module but I cannot tell from he little snippet of the log - you may do better to move the *arr and Synchthing into Docker containers to keep the OS cleaner.

For audio DSP in a Qt app I have good success with using a lock-free queue (e.g. https://github.com/cameron314/readerwriterqueue) to communicate from / to the UI threads. Code more-or-less looks like

    connect(model, &ModelObject::somethingChanged, [=] {

We recently removed readerwriterqueue from our project due to issues and replaced with simple locking queue (and got better performance in the result). Your code looks interesting, but we can't use it due to C++17 usage.

Fan control generally involves hysteresis. This means a cooling fan turns on at one temperature, and then turns off once temperature has fallen to another lower temperature. This avoids cycling the fan on and off too much. The difference between those two temperatures is hysteresis. The default hysteresis is 10°C and maybe the fan never manages to cool the CPU to 45°C. A parameter has been added to change hysteresis: https://github.com/raspberrypi/linux/commit/fa390133fd17f2cc6aa5a7d2e472c073a1115fe1

I see that the PR against the Raspberry Pi linux repo is out [0]. Interestingly they are introducing a BCM2712 defconfig with a 64k default page size.

[0] - https://github.com/raspberrypi/linux/pull/5618

and can grab their patched kernel source here ( use the dtbs and overlays and kernel from your compiled version)

Also was your pi issue related to this? https://github.com/raspberrypi/linux/issues/3381 or what do you mean jittery, unstable?

Could be related to the driver load order/blacklisting (https://github.com/raspberrypi/linux/issues/435) Or couple of people report configuring the dtoverlay=imx477 in the boot config helped (https://raw.githubusercontent.com/raspberrypi/firmware/master/boot/overlays/README)

thanks, I also found this: https://github.com/raspberrypi/linux/issues/5398

And ready! :)

> It is the most basic task for Linux computer...

Well, it depends for whom. Also, you need adequate software and hardware. About wireless, the chipset in an RPi4 is designed for clients, not APs, and its capabilities on having multiple clients are quite limited:

https://github.com/raspberrypi/linux/issues/3010

Routers like the Omnia Turris, Mikrotik, PC Engines... use specific mini PCIe cards that can be as expensive as a full Raspberry Pi 4, just for the wireless.

https://www.discomp.eu/wireless-minipci-cards_c14501412.html