linux VS hub-feedback

Fan control generally involves hysteresis. This means a cooling fan turns on at one temperature, and then turns off once temperature has fallen to another lower temperature. This avoids cycling the fan on and off too much. The difference between those two temperatures is hysteresis. The default hysteresis is 10°C and maybe the fan never manages to cool the CPU to 45°C. A parameter has been added to change hysteresis: https://github.com/raspberrypi/linux/commit/fa390133fd17f2cc6aa5a7d2e472c073a1115fe1

I see that the PR against the Raspberry Pi linux repo is out [0]. Interestingly they are introducing a BCM2712 defconfig with a 64k default page size.

[0] - https://github.com/raspberrypi/linux/pull/5618

and can grab their patched kernel source here ( use the dtbs and overlays and kernel from your compiled version)

Also was your pi issue related to this? https://github.com/raspberrypi/linux/issues/3381 or what do you mean jittery, unstable?

Could be related to the driver load order/blacklisting (https://github.com/raspberrypi/linux/issues/435) Or couple of people report configuring the dtoverlay=imx477 in the boot config helped (https://raw.githubusercontent.com/raspberrypi/firmware/master/boot/overlays/README)

thanks, I also found this: https://github.com/raspberrypi/linux/issues/5398

And ready! :)

> It is the most basic task for Linux computer...

Well, it depends for whom. Also, you need adequate software and hardware. About wireless, the chipset in an RPi4 is designed for clients, not APs, and its capabilities on having multiple clients are quite limited:

https://github.com/raspberrypi/linux/issues/3010

Routers like the Omnia Turris, Mikrotik, PC Engines... use specific mini PCIe cards that can be as expensive as a full Raspberry Pi 4, just for the wireless.

https://www.discomp.eu/wireless-minipci-cards_c14501412.html

image: this key specifies the image this container is based on to be created. It can be a local image or an image from the Docker hub.

Finally, we can upload our application to Docker Hub so that other people can use the image we created. To do this, follow the steps below:

Pull the official Docker distribution of pgAdmin 4 from the Docker Hub repository with the following command:

To use Docker Scout, you'll first have to have a Docker Hub account. Follow the installation instructions for Docker Scout on GitHub. Once Docker Scout is installed, you can sign in to Docker Hub on the command line with the docker login command.

Go to Docker Hub, sign up, and log in to your account's overview page.

Login to Docker [Create an account with https://hub.docker.com/]

Docker Hub

Dockerhub account

There are a lot of docker-compatible registries almost every cloud provider has its registry but for this article, we will use the docker registry called docker hub. Go to the website create a new account and sign in then you can push or pull images.