documentation VS RaspiBolt

You can output video (called DPI) from your gpio with the correct config settings. You would just need hsync, vsync, and 2 color bits (green for video, blue for intensity should give the best image, but feel free to play around with that). Next step it to use level converters, as hooking up TTL directly to the Pi will fry it. https://github.com/raspberrypi/documentation/blob/develop/documentation/asciidoc/computers/raspberry-pi/display-parallel-interface.adoc

I heard a bunch of controversial things on Balena Etcher. Isn’t it better to recommend rufus, or just the default “restore volume from image” option windows had since like v8?

Sony's factory in Wales has been the biggest but not the only one, official Pis have been made in China, Japan and Taiwan too, can find out which manufacturer you got from the revision code, https://github.com/raspberrypi/documentation/blob/develop/documentation/asciidoc/computers/raspberry-pi/revision-codes.adoc

You need to have various files needed for it's startup process on the first partition as described here - https://github.com/raspberrypi/documentation/blob/develop/documentation/asciidoc/computers/configuration/boot_folder.adoc

So, the official documentation at https://github.com/raspberrypi/documentation/blob/develop/documentation/asciidoc/computers/configuration/headless.adoc forgot a very important part: how to encode/hash the password under Windows? Not everybody has a second running Pi or linux-machine at hand.

You can do the initial setup headless if you wish and dispense with the keyboard etc. It's just a case of creating two files in /boot; an empty one called 'ssh' to enable the SSH server, and a wpa_supplicant.conf file to tell it how to connect to your Wi-Fi. The documentation explains the details.

The SOCs on raspberry pi have a DPI interface which can drive such display without a driver board; however as you said, you do need to have a datasheet for the specific LCD as you need to get the timing.

See Issue #725 ✅ GUIDE

All on-going pull requests (8) can be viewed here. Reviews and ACKs are needed.

Hope that helps. Otherwise I'm not sure how to adjust the QT/GUI version of Bitcoin Core, I used a guide on Raspberry Pi (Raspibolt).

As LND v0.13.3 is a critical security update of LND, it might be beneficial to merge PR #763 asap... (also the Electrs update #762 which contains significant changes, see Issues below)

I used this guide: https://stadicus.github.io/RaspiBolt/

You could just install Muun on your phone for now until you're sorted. I recommend https://stadicus.github.io/RaspiBolt/ But I hear a simpler plug and play one is Umbrel.

Several users have reported issues when trying to update their Electrs. Before updating, you might find useful to read the following things: 1) A pull request by Electrs maintainer romanz to update some settings in the Electrs conf file (the chqnges can be seen here); 2) a discussion on the TG group between two users troubleshooting issues (starting at this post)

#762: Update docs for the latest electrs release (by romanz, Electrs creator & maintainer)

#760: swapped S1 Wireless LAN and S5 Boot placements in rasp-config steps of docs (by bradley-ray)