qmk_firmware VS redox-keyboard

I had trouble with HMR as well at the beginning, but since switching to sunaku's fork/PR I've almost eliminated all the issues I had with it. And worth mentioning is urob's timeless HMR config from which I think the fork/PR takes some of its inspiration.

Affirmative. I updated my fork and my clone last week. I also did a second, fresh clone and merged this PR: https://github.com/manna-harbour/qmk_firmware/pull/56

Im guessing installing something like this is what i need to do? https://github.com/manna-harbour/qmk_firmware/pull/56

See my Miryoki PR for details: https://github.com/manna-harbour/qmk_firmware/pull/56

I have a separate system for that as part of this old unreleased project. They're orthogonal so could be used together, but it'd be nicer if they were integrated. If you just want to remap buttons or map buttons to keys you can do that in the OS.

Well, things like Bilateral Combinations are aware of which hand is using the modifier to only apply it to the other side's presses & minimise accidental triggering on same-hand rolls.

Use 3 of those YJ-14015 modules (e.g. https://github.com/mattdibi/redox-keyboard/tree/master/redox-w) with a Pro Micro Q2: Is there a way to generate the PCB for this with ergogen or do I have to wing it in KiCad?

After some initial research, I've found a couple of models that seem to meet my requirements: the Lily58 and Redox-w v2.

There's a website that has a bunch of split keyboard layouts you can print out at full scale and sort of test drive really easily. I did that and found I didn't like the moonlander or ergodox thumb clusters, which is why I went with a Redox instead.

It's just a remix of the original case. Mattdibi also included the STEP and fusion360 file. What I changed on that case: Add a cavity for a 503035 battery, Add a ~3 degrees tilt for the battery and Hex insert for the nuts, making it much easier to assemble / disassemble.

If you want more of a full-size, five-row configuration, get a Redox PCB from Falbatech or Beekeeb.

To anyone who is here in 2 years looking to find a good case the soldered PCB is listed on the official GitHub ( https://github.com/mattdibi/redox-keyboard) as the Redox rev1. 0W. This is the soldered version and is the exact same as the one sold on falba tech and is compatible with the official case found here: https://github.com/Pastitas/Redox-neodox-Case.