cadmium VS imagebuilder

No, not planned. Also, there is Cadmium already

Also check out Cadmium, I stole som code for that and managed to boot Slackware 14.2 on my mine.

Figure out what chipset (more specific than "Arm") it has, and then see what you can do with https://github.com/hexdump0815/imagebuilder or https://github.com/Maccraft123/Cadmium

I have built a few kernels a long while ago and fiddled with building Cadmium Linux and managed to create an arch port. Granted this was on the back of other work https://github.com/Maccraft123/Cadmium/pull/53 .

ARM USERS LOOK HERE: Cadmium (specialized Linux distro for ARM Chromebooks only) https://github.com/Maccraft123/Cadmium

So after U-Boot 2018.10 is installed, I downloaded the imagebuilder img to see if it would boot. Tried this one : https://github.com/hexdump0815/imagebuilder/releases/download/230218-04/chromebook_nyan-armv7l-bookworm.img.gz. I first tried to use a Micro Center SD card which booted into a black eDP screen via the nyan-big dtb. The nyan-big-fhd and blaze dtbs all showed the boot sequence stuck, either on SD card failing to initialize or voltage being disabled.

The Duet 3 is the same chipset (the Snapdragon 7c Gen 2) as the Duet 3, so I'd expect similar results, using https://github.com/hexdump0815/imagebuilder/blob/main/systems/chromebook_trogdor/readme.md

Since it is U-Boot, it probably needs a U-Boot kernel to boot right? But I wanted to test it out, so I went to imagebuilder and downloaded https://github.com/hexdump0815/imagebuilder/releases/tag/230218-04 for the nyan-big and flashed to a SanDisk SD Card. All right, this image is probably depth charge based. But I get a black screen. Blue power LED comes on and I get black screen. I inserted SD Card and rebooted, still black screen. I remember my Chromebook crashed like half a hour later due to lack of RAM, half a hour after flashing Libreboot successfully, but have not rebooted.