lm-sensors VS nbfc-revive

Can you tell if they spinning at all? I've had many fans just go bad over the years. You might try using lm-sensors to see if you get any helpful info from the OS.

read this: https://github.com/lm-sensors/lm-sensors/issues/416

There is lm-sensors which has fancontrol. GUI-edition

Would adding this script to /etc/sysconfig/scriptsmake any difference?

The sensors are, as of now, not supported. ASUS uses a new Nuvoton NCT6799D-R chip to communicate the sensor data, for which there seems to be no driver in the Kernel yet. There is a bugreport on lm-sensors: https://github.com/lm-sensors/lm-sensors/issues/416

https://github.com/lm-sensors/lm-sensors did you follow these instructions also? I feel like the im-sensors was an important step.

Thanks, are you talking about https://github.com/lm-sensors/lm-sensors ?

The closest I've gotten to successful control is by using the nbfc-revive fork of NoteBook FanControl (https://github.com/UraniumDonut/nbfc-revive) by following these steps:

For laptops there's nbfc or its rewrite nbfc-linux.

One other idea, https://github.com/UraniumDonut/nbfc-revive

I got rid of NitroSense and installed NBFC instead. (https://github.com/UraniumDonut/nbfc-revive) Fans go on when they should and off when they should. You know the laptop's very hot when NBFC ramps up the speed to the max as soon as Windows boots up.

If it came with Windows 11, stay with Windows 11 unless you have a product key for Windows 10. Windows 11 garbage right now, but it'll catch up soon. Don't worry about undervolting. Just set your power plan to 99%. If you remove NitroSense and replace it with NBFC (https://github.com/UraniumDonut/nbfc-revive) you'll be golden.

Change your power settings to use 99% of the CPU. Also make sure you're using Notebook Fan Control. https://github.com/UraniumDonut/nbfc-revive

There's also a fork of it with more updates, since the other tool wasn't updated for quite some time: https://github.com/UraniumDonut/nbfc-revive

I understand that some people want to avoid the CC at all cost. It might reduce battery life and it's a crappy peace of software in general. The Notebook Fan Control project got revived and it seems that in the next couple of days an update might be included that will support the 11800H. This would allow you to control the Fans without the CC. Some people uninstall CC completely (and lose the OSD, Keyboard Color Control, Power modes and thus the ability to raise the GPU Power limit), some have it autostart and kill it. If you write a script for that which kills CC on login and starts NBFC, this could be comfortable and you might keep the OSD. Also you could choose Turbo Mode and kill your CC afterwards. https://github.com/UraniumDonut/nbfc-revive