lm-sensors VS Getting-Started-With-ACPI

Can you tell if they spinning at all? I've had many fans just go bad over the years. You might try using lm-sensors to see if you get any helpful info from the OS.

read this: https://github.com/lm-sensors/lm-sensors/issues/416

There is lm-sensors which has fancontrol. GUI-edition

Would adding this script to /etc/sysconfig/scriptsmake any difference?

The sensors are, as of now, not supported. ASUS uses a new Nuvoton NCT6799D-R chip to communicate the sensor data, for which there seems to be no driver in the Kernel yet. There is a bugreport on lm-sensors: https://github.com/lm-sensors/lm-sensors/issues/416

https://github.com/lm-sensors/lm-sensors did you follow these instructions also? I feel like the im-sensors was an important step.

Thanks, are you talking about https://github.com/lm-sensors/lm-sensors ?

Got spoofing working, if you have a R9 290 or similar and have problems spoofing, do as explained here https://github.com/dortania/Getting-Started-With-ACPI/pull/71/files

It's a must though. Every PC is different, even 2 identical models might not have the same ACPI tables.. I would Start here.. There's only a few things you'll really need, especially on these machines. While there's many methods, a clean install of windows NOT booted through OpenCore, using SSDTime is the easiest for most.

Any log files? Debug?? Not enough info to give you any advice, except reading the guide and following it. Looks like possibly some SSDTs/ACPI files missing or wrong.

Question - Im assuming you're using one of those pre-builts you linked ,or parts of it. Did you make all your own ACPI/SSDT's, fix sleep, etc?? BIOS up to date? Why aren't you following the guide and making a config? .

SSDT-PLUG-DRTNIA

i have try everything here https://dortania.github.io/Getting-Started-With-ACPI/

read this