kmk_firmware VS qmk_firmware

plenty.. try their zulip and you will see(https://kmkfw.zulipchat.com/).. also google may help... plenty of youtube pushers also will provide you the info...

Im not really sure where the problem would be. Try to flash the example firmware from the official kmk github and see if that works for you. If it doesn't then there may be a problem with the hardware 🤔 https://github.com/KMKfw/kmk_firmware/tree/master/boards/reviung41

You'll need to copy the following onto storage device: 1. CircuitPython files/binaries for controller, if not present 2. kmk folder from KMK firmware. github, if not present. 3. kb.py and main.py files for your board. Pre-configured boards can be found in KMK firmware github in boards directory.

I'll try to set it up locally and will otherwise contact... Got time over Easter. Thx a lot. I also have seen that piantor for KMK has an open pull request which means the board dev will soon be ready for workflow builds of Miryoku. https://github.com/KMKfw/kmk_firmware/pull/723 I like KMK a bit more as it will allow me to quickly change the extra keys to whatever makes sense .... All just with s simple text editor.

Here's a pull request to add piantor board to KMK firmware. The logic to define config for left and right halves is actually really nice.

There's a recent pull request to add the Piantor to KMK, and that's a split 42 key that uses the pico with direct pins to keys: https://github.com/KMKfw/kmk_firmware/pull/723

See above. I set this up some time ago; the one I am using is pretty much the demo one from the KMK github.

I've uploaded these files to github here if you wish to look around but I recommend also looking through the various boards in the kmk github as well for more guidance too. This was my first kmk based keyboard so my code might not be the best lol but I hope this is helpful regardless. Let me know if you have any questions!

https://github.com/KarlK90/qmk_firmware.git and branch feature/raspberry-pi-rp2040-support

For reference for anyone that tries it: - the kb2040 works fine for me now in my Fifi, not noticed any issues so far - At the time of writing support is not merged to QMK yet, I used the KarlK90 branch - for the keyboard to work, I only had to change the PIN mappings: from

I too have the wireless version for my laptop! Both my Elecom huges have the ball bearing mod. I'd recommend picking some up and doing it, makes the ball so much smoother. Build log is on the Crowboard github page. and I used KMK firmware. Firmware for this particular board is on the Keyboard Dweebs firmware repository. If you wanna take a look at what is needed. It's very straight forward. Easier than QMK in a lot of ways. There is a version of QMK for pico that's being worked on. the branch is here if you're interested. as far as I am aware almost everything is working now too, which is neat. So I'm going to work on getting qmk on the crowboard in the next week or so.

Thank you, the layout is available in the my personal qmk repo for key placement see the layout tester or case files. While pro micros are good, I would recommend going with blackpill boards with stm32f411 mcus.