kint VS qmk_firmware

I can suggest the following, I had three advantage 2s before picking up my 360pro.

I modded all of the 2s with the following boards:

* https://github.com/kinx-project/kint - Great board, requires usb of course. Programmable with QMK.

* https://github.com/wizarddata/Blue-Wizard-Mod - Doesn't support QMK but does support ZMK but is bluetooth. Great board.

I picked the kint up on some pcbway type service, the blue wizard I got off ebay.

Is Stapelberg's Kint with a Blackpill the suggested approach nowadays?

https://michael.stapelberg.ch/posts/2013-03-21-kinesis_custom_controller/ https://github.com/kinx-project/kint

I have a KinT board in my Advantage2 keyboards, gives you all the QMK goodness.

I assumed you tried using the link for kinesis_kint41_default.hex from https://github.com/kinx-project/kint/tree/main/default-firmware and it did not work. It is difficult to download individual files from github if the file is not text.

Some time ago, I replaced the default SmartSet controller board by a KinT board (produced by JLCPCB) with a Teensy LC controller to run QMK. It's splendid and I like it so much more than the default SmartSet firmware. Also makes it easier to keep the 360 Pro and the Advantage2 in sync.

You mean Stapelberg's own Kint? It's also great, I use it in two KA2s (only not my work KA2).

I agree that reduced finger movement is a crucial step in achieving typing efficiency. This is nicely solved by mod tap modifiers in QMK/ZMK[1] where key acts as a char when tapped and as a layer while pressed.

[1]: https://github.com/qmk/qmk_firmware/blob/master/docs/mod_tap...

Separate wireless controller, see the glue code at [0]

[0]: https://github.com/qmk/qmk_firmware/compare/master...nuphy-s...

If you have a keyboard that runs QMK firmware[0] with the VIA[1] feature enabled[2], then there is a convenient testing app available from the same place you customize your keys [3].

[0] https://qmk.fm/

I made a layout that I'm happy with. Spanish is my native language, so it has characters like the accents and 'ñ', but it's meant to be used for programming as well. Visual Studio uses a lot of Ctrl and Ctrl + Shift shortcuts, so I left them in the same place as the default Corne layout so I can press them both with my pinkie finger. Perhaps some of the ideas are useful to you.

Also, it would be possible to do this for the RP2040. However, it needs some work to get working. but for example: https://github.com/qmk/qmk_firmware/pull/20999

Ok, it's an ST7735, not too different from the ST7789. You should be able to get running by looking at their files in the QMK repo and going from there. You should also check their resources page.

UPDATE: after fluffing around a little bit, I have manged to fix this code: https://github.com/qmk/qmk_firmware/blob/master/keyboards/lily58/keymaps/bongocat_wpm_responsive/keymap.c and flash it successfully - it seems not to be working correctly as the cat is only hanging there and does not respond to the wmp count. If anybody spots anything wrong in the code please let me know!(C is not my language but I am a programmer, I am gonna get at it again over the weekend if I have time left)