dactyl-keyboard VS CMD-dactyl-manuform

that's not entirely accurate. It is a derivation of the dactyl-manuform. I used the generator from this project to produce the case. https://github.com/ibnuda/dactyl-keyboard The earliest biuld of the dactyl-manuform that I can find is: https://github.com/abstracthat/dactyl-manuform

https://github.com/ibnuda/dactyl-keyboard/tree/hotswap/things This is where I pulled the stl from however it doesn't come with a base plate stl so I had to make that myself

What generator did you use? I’ve never been able to get this one to load: http://dactyl.siskam.link/

there used to be a generator at https://dactyl.siskam.link/ but is not loading now. (easily generated files from your input in a form) you could also have them built to order from https://ohkeycaps.com/products/built-to-order-dactyl-manuform-keyboard

There are external holders for pro micros and elite C under https://github.com/ibnuda/dactyl-keyboard/tree/refaktor/resources/public

Try this: https://dactyl.siskam.link

I'm happy to print the case for one for you for the cost of the filament, if you want (20EUR or so). Shipping to outside of europe might make local printers cheaper. There's a generator for custom shapes at https://dactyl.siskam.link

You can generate a custom one with https://dactyl.siskam.link/ (demo of how to use here: https://youtu.be/9nwXUfi49oU)

Hi I am using this github repo's shcematics: https://github.com/markdhooper/CMD-dactyl-manuform/blob/master/schematics/Schematic_dactyl-manuform-5x7.png

I built a Zodiark with is basically a Soflie but with more keys (68 keys). It's pretty good but I would prefer more thumb keys and LEDs at the top of each key.) I would recommend a Dactyl Manuform. See https://dactyl.siskam.link/manuform and https://github.com/markdhooper/CMD-dactyl-manuform

also thinking of this fork specifically

also i'm thinking of using this fork rather than the regular manuform 5x7, thoughts on it?

So i think ill build this dactyl variant and was just wondering if there is a pro micro with usb c? as long as it is as easy to flash with QMK and has the same amount or more pins

I followed this to build it so it would be close to my moonlander in key configuration: https://github.com/markdhooper/CMD-dactyl-manuform

For the dactyl I used Mark's fork and followed his excellent guide for the Cmd. [CMD-dactyl-manuform:github] https://github.com/markdhooper/CMD-dactyl-manuform [CMD Guide] https://www.youtube.com/watch?v=CxNKWNKBLMs&t=908s

CMD-dactyl-manuform: github

Just when i finished the design i found this tutorial with these stl files and they are more detailed and have the mountingholes unvisible from the outside... so i think im starting my dactyl journey with his tutorial and dodge my own files.

I see the line you're talking about. Didn't pay any attention to it till you pointed it out. I guess that I got confused when looking at the schematic that/guide that I've been following: Schematic