homebridge-shelly VS shelly-homekit

The only thing I could think of is using something like a Shelly Plus 1 in HomeKit (firmware/Homebridge paired to a strike of the appropriate voltage.

This or this.

You could use a generic LED strip and a Shelly RGBW2 flashed with shelly-homekit or use it without flashing through homebridge-shelly

They’re not HomeKit compatible by default (nothing DIN rail mounted will be) but could potentially be supported using Homebridge depending on which relay you go with.

homebridge-shelly

Yup! This would be my recommendation. A Shelly 2.5 if you want to add two independent circuits to HomeKit. Not native, but works fantastic! The Shelly can be added to HomeKit via a Homebridge plugin or (my personal favorite) Mongoose HomeKit firmware. Plus you can still use your normal-looking wall switches!

Either a Shelly 1, 1PM, or 2.5 depending on if you just want on/off, power monitoring, or need a dual channel option. Can be integrated to HomeKit via Homebridge or my favorite, Mongoose Shelly HomeKit.

And then as CautiousAd said either Mongoose HomeKit Firmware (my personal favorite) or Shelly Homebridge will get you up and running 👍🏼

I can't recommend Shelly enough, the Shelly 1L is a no-neutral relay that can go in behind your switches and tends to be pretty solid. You can control them through an app, flash with shelly-homekit, or use homebridge-shelly to control them.

You could potentially use the requisite Shelly for your use case and install this firmware on it to expose it to HomeKit as a lock

As far as I know you can flash a software on the relays: https://github.com/mongoose-os-apps/shelly-homekit And make them homekit compatible. Here is the video: https://youtu.be/BZc-kp4dDRw Just make sure to use correct download for your device

Shelly Firmware

Shelly one flashed with HomeKit. So easy cheap and one of the most reliable HomeKit devices I have. Watch the video https://github.com/mongoose-os-apps/shelly-homekit

The relay itself doesn’t matter especially given the fact that it’ll be on/off only, so I’d recommend a Shelly Plus 1 flashed with firmware to get it into HomeKit incredibly easily. The contactor doesn’t need to be anything fancy, just needs to be rated appropriately for the load at hand!

I use Shelly relays flashed with firmware (I prefer it over Homebridge) and automations to do this. It keeps the „normal“ look of the lightswitches and won’t cut power to the bulbs. Plus you can configure the different modes for the lightswitches! Check out the link for edge/toggle/etc. 👍🏼

If your light switch is a 2 gang switch I’d recommend picking up a Shelly 2.5, a Shelly 1 Plus, or Plus 1PM for single switches and flashing them with this firmware.

Alternatively, a more cost efficient option could be LED strips of your choice paired with a Shelly RGBW2 flashed with firmware.

The only thing I could think of is using something like a Shelly Plus 1 in HomeKit (firmware/Homebridge paired to a strike of the appropriate voltage.