checkn1x VS wireless-carplay-dongle-reverse-engineering

Hello, as the title says, just came across the option of checkra1n after finding out that unc0ver was not available for iphone 6s on ios 14.6 (proven fact, installed unc0ver and got unsupported message) . Due to the fact that i am using a windows pc , i looked what are my options again. Before finding asineth0/checkn1x iso , i came across https://iamjustatech.blogspot.com/ who was offering checkra1n0.12.4windows image in order to be able to create a bootable usb with rufus. So, my question would be, did i exposed myself by not using the git variant of the iso? All my concern is about the pc, the phone is empty and does not have my main ICloud account. I am thinking about not infecting my BIOS when i ran the usb boot and jailbroke the 6S or i don't know, any other kind of malware that could spread over my ssd. I don't know if any of these scenarios are possible , but i thought i would ask in case i should install a clean version of windows and maybe re-flash the bios too.

download checkn1x iso https://github.com/asineth0/checkn1x

There is no tool for Windows. Easiest solution is checkn1x, which is a teeny-tiny Linux distro stripped down to only have checkra1n and the bare essentials: https://github.com/asineth0/checkn1x

"checkn1x is a Linux-based distribution for jailbreaking iOS devices w/ checkra1n." - Asineth (the creator of checkn1x)

You may want to look into a Linux bootable USB running something like https://github.com/asineth0/checkn1x

Since you want Cydia, forget about odysseyn1x and use the regular checkn1x (https://github.com/asineth0/checkn1x). It's just stock checkra1n in a bootable ISO.

With a Windows PC you can use a USB flash drive that will boot your PC into Linux and run the install tool. Take a look at this https://github.com/asineth0/checkn1x

You’ll have to either dual-boot or boot off of a USB to macOS or Linux (it also works on Linux). I’ve used checkn1x and it works fine

Ubuntu is a custom entry to GRUB sitting within the main ESP. Checkn1x entry is a version of alpine linux I modded based on asineth0's checkn1x. Its ramdisk and kernel sit within the main ESP and is loaded by systemd-boot as a custom entry in OpenCore.

Some useful info here: https://github.com/45clouds/WirelessCarPlay https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering

So, in an effort to save it: When plugged to the wall, red light turns on and that's it. I was unable to flash it with any of the files found at https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering ... might be there's no appropriate fw for CP2A model.

Depending on your model, you can try installing a different firmware using a USB stick. This page has firmware for the Carlinkit 3.0 dongles - which also works with noname CPC200-U2W-Plus dongles like mine. I've flashed mine a few times, and I haven't managed to kill it yet :-) (Make sure you follow the instructions in the bottom of the page)

Download a firmware from here: https://github.com/ludwig-v/wireless-carplay-dongle-reverse-engineering/tree/master/Firmware (Read the instructions at the bottom of the page, as they might change since this post was written)