cc2538-bsl VS hekate

Flash the stick with C:\Program Files (x86)\Texas Instruments\SmartRF Tools\SmartRF Packet Sniffer 2\sniffer_fw\bin\cc1352p1lp\sniffer_fw.hex . As far as I know, you can flash it using the same methods you'd normally use to flash Z-Stack firmware. cc2538-bsl.py works, but if you ask it to verify, it'll show "ERROR: Timeout waiting for ACK/NACK after 'Get CRC32 (0x27)'". And note that once you flash the sniffer FW, you won't be able to re-flash it over USB; you'll need to use the cJTAG pins on the board (the Reset, TMS, TCK, etc… pins shown in this pic), which requires extra hardware, such as the CC-DEVPACK-DEBUG. Or at least I couldn't figure out how to do it; if it's possible, please let me know how.

I have a v1 unpatched Switch. I'd like to start the process of installing custom firmware. I read this note about being careful to make sure Atmosphere and Hekate support the latest firmware before updating, which they both seem to. But there's also something about gamecard firmware?

Make sure you have most update files from the main repo GitHub. https://github.com/CTCaer/hekate/releases. Follow the update instructions

Atmosphere : Atmosphere 1.5.4 (pre-release) Hekate : v6.0.4 & Nyx v1.5.3 Sigpatches : sigmapatches.coomer.party or hackintendo.com

I've installed modchip on Lite. It shows the "no sd card" logo. I've tried both hekate official gitthub and HATS packages loaded into an SD card, but it gives a black screen. It returns to no sd card when I press the power button for 10 seconds after removing the sd card.

Download Hekate 6.0.4 from the Github Page: https://github.com/CTCaer/hekate/releases/tag/v6.0.4 And move the extracted ZIP Contents to the Root of your SD Card.

Hekate 6.0.4 is out, get it: https://github.com/CTCaer/hekate/releases/tag/v6.0.4Also make sure you update AMS to 1.5.3: https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.5.3

- (Re)Initialize Switch from OFW (16.0.3) without any online (Nintendo) account - Turn off Updates in OFW (Auto-Update Software: Off) - Format mSD card (FAT32; 32k) using PC - Copy homebrew files to mSD card: ---- Hekate (https://github.com/CTCaer/hekate/releases/tag/v6.0.4), ---- Atmosphere (https://github.com/Atmosphere-NX/Atmosphere/releases/tag/1.5.3), ---- Sigpatches (https://sigmapatches.coomer.party/), ---- fusee.bin: /bootloader/payloads/ (https://github.com/CTCaer/hekate/releases/tag/v6.0.4), ---- hekate_ipl.ini: /bootloader/ (https://rentry.org/EristaEmuNAND), ---- exosphere.ini: / (https://rentry.org/EristaEmuNAND), ---- default.txt: /atmosphere/hosts/ (https://rentry.org/EristaEmuNAND) - Insert mSD card into Switch - Use RCM jig to boot into RCM - Tools > Partition SD Card - Home > emuMMC > Create emuMMC > SD Partition > Part 1 - Change emuMMC > SD RAW 1 - Rebot Switch into Hekate - Launch Atmosphere CFW: Verify version: 16.0.3|AMS 1.5.3|E