arisu-case VS arisu-pcb

The files for the case and PCB are open source ( https://github.com/FateNozomi/arisu-case ). I had the case cut by ponoko and some PCBs manufactured by JLC. The PCBs will probably be hard to come by these days though since the MCU shortage started.

Keyboard - FateNozomi's アリス, made with stacked translucent white acrylic

Case files are here: https://github.com/FateNozomi/arisu-case

GitHub - FateNozomi/arisu-case: Case design files for Arisu Keyboard

ever checked out an open source build such as the Arisu or the Adelheid? Heres one that I've built: lightss on or off

If you need to get a case made, its super easy to upload the files located below to Ponoko. (If you have questions about this I'd be happy to answer. It's about $100 for a highpro case, half that if you want to just do low profile). https://github.com/FateNozomi/arisu-case

Get an arisu pcb fabricated from a pcb manufacturer and an acrylic case cut imo. https://github.com/FateNozomi/arisu-pcb https://github.com/FateNozomi/arisu-case

Take a look at the Github files for the open source arisu pcb. I'm pretty sure this is what got copied for ymdk wings. Then everyone started calling every ergo 65% an arisu for some reason.

Arisu is name because original one was Japanese and it was first "Alice" that had arrow keys so the name stuck for Alice with arrow keys to be called Arisu, THIS is the original Arisu, it had arrows as you can see, YMDK Wings is one of the most popular Arisu layout keyboards, Akko Alice is not 1:1 of the Arisu like YMDK Wings, but it's obviously not Alice because of arrow keys, should have just called it Arisu and gave it japanese sublegends as a bonus, like the keycaps on ACR59

Sounds like you have enough keyboard experience to know what you like in terms of components like switches. This might be a good starting point for PCB design https://github.com/FateNozomi/arisu-pcb if you go that route and what something to build off of.

If you want even cheaper you can get your own PCB printed by JLPCB https://github.com/FateNozomi/arisu-pcb

so as far as keyboard stuff goes for this game, I have personally found that rebinding keys and a different profile for my keycaps has helped a ton. For reference, I am running an arisu layout while playing this game, so needless to say I am moderately limited in my options for keybinds. I have gone and set my regular attacks to mouse 1/2, and keys 1-3, and my elite attacks to "q-ertg" (I play scourge). For the other stuff, you can either just use the rest of the number keys, bind them to more things around the left side of your board, or get a mouse with more buttons on it (I used to use a razer naga hex). As far as the keycaps go, I have found that a higher profile set like the KAT profile has made hitting keys a lot nicer.

Arisu

Download files: https://github.com/FateNozomi/arisu-pcb/releases (Make sure to dropdown the assets for v1.1 to download)