Arduino VS PowerToys

I learned from looking at example code in the Arduino IDE (a really good and free code editor https://www.arduino.cc/en/software). The Arduino IDE allows you to add more boards (like ESP32, ESP8266, Tiny etc.) so you're not limited to using only their Arduino boards.

Based on what I am seeing from the Keystudio website, the software you need is just the Arduino IDE. This can be downloaded from Arduino.cc for most operating systems, including Mac OSX. You may need to install support for other boards or install libraries to make it work with the Arduino and hat included with the kit.

Download and install the Arduino IDE. After installation, open the IDE to the first sketch.

Well, your first course of action would be to download the software - https://www.arduino.cc/en/software

You can download the IDE from here.

You will need to download and install the Arduino IDE to do that. I would suggest the Legacy 1.8.x IDE or the Arduino Web Editor (which will still require that you install some software on your computer to help transfer the program to the Arduino).

The software used for that video is the arduino IDE https://www.arduino.cc/en/software

Wiring: You're on the right track with your wiring assumptions. The red wire should connect to the 5V pin, the black wire to the GND pin, and the green wire to one of the analog input pins (A0-A5) on the Arduino Leonardo. For example, you can connect the green wire to the A0 pin. Programming the Arduino Leonardo: To translate the handbrake input to Assetto Corsa, you'll need to program the Arduino Leonardo to act as a USB HID (Human Interface Device). This will allow your computer to recognize it as a game controller. First, you'll need to install the Arduino IDE (Integrated Development Environment) on your computer. You can download it from the official website: https://www.arduino.cc/en/software

Windows PowerToys GitHub Repo

RunFlow is a cross-platform productivity tool which can launch apps and search files and more, that similar to Wox and PowerToys on Windows, and also similar like Alfred and Raycast on macOS. But we have differences with these tools, and we have our own unique new features. Right now, at the below, we will introduce you what features of RunFlow have been implemented in more details. It's an amazing journey, let's start.

I'm curious - when you were doing research into the mechanics of hinting options, did you stumble onto any relevant discussion around allowing custom pixel geometries to be defined, to enable hinting on modern OLED / WRBG displays? There's a good thread on the topic here[0], with some people referring to it as 'ClearType 2' on the MS side [1]. On the oss side I know FreeType theoretically supports this[2], but I can't quite figure out how relevant the FreeType backend is to this most recent work.

This is great work btw.

[0]: https://github.com/snowie2000/mactype/issues/932

[1]: https://github.com/microsoft/PowerToys/issues/25595

[2]: https://freetype.org/freetype2/docs/reference/ft2-lcd_render...

Thank you all for the informative advices. Here is the summary for those who are in the same situation:

1. Run Windows on Linux by using VM

for the applications you can’t run on Linux

Risks:

* some softwares may attempt to detect VMs and refuse running

* Anything what needs to touch hardware may not work.

2. separate "data" partition on D:

3. back up %APPDATA% and %USERPROFILE%

4. learn chocolatey, scoop or winget

Winget should be good enough

5. Don’t worry about C:\Program Files

6. (Mixed) Use/Don’t use Ansible (or saltstack/salt)

Use:

* Allows you to setup a new machine quickly and consistently when one breaks, get stolen, or lost in an inconvenient time.

* You can get a clean and consistent development environment so that you do not depend on anything accidentally installed on the machine.

* If you define specialised roles, create test playbooks for those individual roles, use these roles to compose more complex playbooks, and offload logic to custom ansible modules that are written in python, you won't wrestle with heavy logic in the template or playbook layer.

* installing software and pulling some configs and scripts down is fine

Don’t use:

* You will spend your days fighting a mix of yaml and Jinja.

* You will end up looking at Python errors because there are no static types.

* errors are cryptic.

7. Use WSL2

You need 32gb of ram, but ram is cheap so choose a good thinkpad

8. Debloat with Recommended Tweaks

Run

irm christitus.com/win | iex

from Administrator Terminal (Powershell)

The link leads to https://raw.githubusercontent.com/ChrisTitusTech/winutil/mai...

VirusTotal

https://www.virustotal.com/gui/file/709834b0e003b6bb546cf16e...

9. Get [PowerToys](https://github.com/microsoft/PowerToys)

10. Use Devbox for containered environment

https://www.jetpack.io/devbox

11. Dual-Booting Linux and Windows

If you use physically separated drives, you don’t need partitioning.

12. Dedicated Windows machine for class

Yes it sure would be the cleanest solution but I prefer one device for everything

13. keep a git repository with all dot files in it

Many people suggested me to use virtualization, otherwise just let Windows be Windows.

Also, backing up seems to be a good practice.

I’m planning to write a blog about this, if it worked.

Again, thank you all for the helps!

Powertoys Run (https://github.com/microsoft/powertoys) can do this. There are not that many plugins as Alfred but Window Switcher is built-in.

For sharing a mouse/keyboard between Windows PCs, there is Mouse Without Borders. It's included in PowerToys nowadays.

https://github.com/microsoft/PowerToys

- https://github.com/microsoft/PowerToys

If you’re on Windows, download PowerToys. It’s an app published by Microsoft officially. Then enable Quick Accent in the settings of PowerToys. Now all you have to do is hold down the key you want accented until the switch shows up, then add an accent with your arrow keys.

microsoft/PowerToys: Windows system utilities to maximize productivity (github.com)