WiFiManager VS Arduino

#include "WiFiManager.h" //https://github.com/tzapu/WiFiManager WiFi Configuration Magic #include "ezTime.h" // Time Library - get your POSIX Timezone 'string' to replace TZ/GMT if needed, below, here: https://support.cyberdata.net/index.php?/Knowledgebase/Article/View/438/10/posix-timezone-strings #include "SevenSegmentExtended.h" #include "SevenSegmentTM1637.h" #include "SevenSegmentFun.h" // For Text readouts #include "SoftwareSerial.h" #include "DFMiniMp3.h" //========================USEFUL VARIABLES============================= const char* ssid = "R2D2"; // R2D2 Access point network name (to connect to R2D2, to change/add your WiFi details) const char* password = "Droidyouarelookingfor"; // R2D2 Access point password uint16_t notification_volume = 25; // Speaker volume int Display_backlight = 45; // 4 Digit Display brightness when operating normally (outside of initialisation) int BlueLED_brightness = 50; // Two blue LED's (when connected to ESP32 pin 14, instead of VCC) const char* ntpServer = "pool.ntp.org"; // Your chosen TimeServer const String timezone_posix_string = "EST5EDT,M3.2.0/2:00:00,M11.1.0/2:00:00"; // Insert your own POSIX Timezone string here. See link above for info. //===================================================================== // Avoid changing below here... // Call WiFi Manager WiFiManager wifiManager; // Call a Timezone Timezone TZ; #define CLK 25 #define DT 26 #define SW 27 #define RED_LED 17 #define WHITE_LED 16 const int BLUE_LED = 14; // 14 corresponds to GPIO14 float counter = 0; int currentStateCLK; int lastStateCLK; String currentDir = ""; unsigned long lastButtonPress = 0; int btnState = 0; // timer int timer_secs = 0; int timer_mins = 0; float inc_red_led = 0; // the number of the Blue LED's pin const int BlueChannel = 1; // setting PWM properties const int freq = 5000; const int resolution = 8; class Mp3Notify { public: static void PrintlnSourceAction(DfMp3_PlaySources source, const char* action) { if (source & DfMp3_PlaySources_Sd) { Serial.print("SD Card, "); } if (source & DfMp3_PlaySources_Usb) { Serial.print("USB Disk, "); } if (source & DfMp3_PlaySources_Flash) { Serial.print("Flash, "); } Serial.println(action); } static void OnError(uint16_t errorCode) { // see DfMp3_Error for code meaning Serial.println(); Serial.print("Com Error "); Serial.println(errorCode); } static void OnPlayFinished(DfMp3_PlaySources source, uint16_t track) { Serial.print("Play finished for #"); Serial.println(track); } static void OnPlaySourceOnline(DfMp3_PlaySources source) { PrintlnSourceAction(source, "online"); } static void OnPlaySourceInserted(DfMp3_PlaySources source) { PrintlnSourceAction(source, "inserted"); } static void OnPlaySourceRemoved(DfMp3_PlaySources source) { PrintlnSourceAction(source, "removed"); } }; SevenSegmentExtended blue1(21, 22); // CLK, DIO SevenSegmentFun words(21, 22); // CLK, DIO SoftwareSerial secondarySerial(18, 19); // TX, RX DFMiniMp3 mp3(secondarySerial); void configModeCallback (WiFiManager *myWiFiManager) { Serial.println("Entered WiFi Manager config mode.."); Serial.println(WiFi.softAPIP()); Serial.println(myWiFiManager->getConfigPortalSSID()); } //flag for saving data bool shouldSaveConfig = false; //callback notifying us of the need to save config void saveConfigCallback () { Serial.println("Should save config"); shouldSaveConfig = true; } void setup() { words.setBacklight(80); words.begin(); words.scrollingText("R2D2 START", 2);

Many examples in Arduino tell you to embed HTML to your C++ code (look https://github.com/tzapu/WiFiManager/blob/master/wm_strings_en.h), but my approach is different: The frontend is written in different language (TypeScript + Vue), with separate build process (no C compiler involved). It even is tested independently from Arduino code, on PC.

Hello. Some time ago I' ve strugled with seting up wifi manager in esp_idf framework. Most popular wifi manager made by tzapu was not working on esp-idf framework inside PlatformIo. So I have found tonyp7. It started to work after many changes in library code and makefiles. I have some free time and I can make WifiManager suited to bare esp-idf and esp-idf inside PlatformIo. My question is- do somebody need this ? Maybe there are alternatives which i did not find and my work is pointless. Please share your opinion

#include // Using the Arduino Library Manager, install "WifiManager by tzapu" - lib at https://github.com/tzapu/WiFiManager void setup() { WiFiManager wifiManager; // Start a Wifi link wifiManager.autoConnect("NewDevice"); // (on first use: will set up as a Wifi name; set up by selecting new Wifi network on iPhone for instance) } void loop() { }

include // Using the Arduino Library Manager, // install "WifiManager by tzapu" // lib at https://github.com/tzapu/WiFiManager void setup() { WiFiManager wifiManager; // Start a Wifi link. wifiManager.autoConnect("NewDevice"); // (on first use: will set up as // a Wifi name; set up by // selecting new Wifi network on // iPhone for instance) }

Is that fork needed still? It seems like the main project claims support for esp32 now? https://github.com/tzapu/WiFiManager

Use this one instead: https://github.com/tzapu/WiFiManager

The result is that the WiFiSecureClient doesn't work when used in the bot declaration, so I changed the variable to WiFiClient but I can't use the certificate, so I comment it out and ESP8266.h gives me a thousand errors due to lack of dependencies in its libraries. I should point out that I downloaded the entire project from the Arduino ESP8266, I don't know how to link all the libraries, so I simply took those from the ESP8266WiFi.

#include #include "time.h" #include "sntp.h" char* ssid = "WIFI"; char* password = "w1fi"; const char* ntpServer1 = "pool.ntp.org"; const char* ntpServer2 = "time.nist.gov"; const long gmtOffset_sec = 3600; const int daylightOffset_sec = 3600; const char* time_zone = "CET-1CEST,M3.5.0,M10.5.0/3"; // TimeZone rule for Europe/Rome including daylight adjustment rules (optional) void printLocalTime() { struct tm timeinfo; if(!getLocalTime(&timeinfo)){ Serial.println("No time available (yet)"); return; } Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S"); } // Callback function (get's called when time adjusts via NTP) void timeavailable(struct timeval *t) { Serial.println("Got time adjustment from NTP!"); printLocalTime(); } void setup() { Serial.begin(115200); // set notification call-back function sntp_set_time_sync_notification_cb( timeavailable ); /** * NTP server address could be aquired via DHCP, * * NOTE: This call should be made BEFORE esp32 aquires IP address via DHCP, * otherwise SNTP option 42 would be rejected by default. * NOTE: configTime() function call if made AFTER DHCP-client run * will OVERRIDE aquired NTP server address */ //sntp_servermode_dhcp(1); // (optional) /** * This will set configured ntp servers and constant TimeZone/daylightOffset * should be OK if your time zone does not need to adjust daylightOffset twice a year, * in such a case time adjustment won't be handled automagicaly. */ configTime(gmtOffset_sec, daylightOffset_sec, ntpServer1, ntpServer2); /** * A more convenient approach to handle TimeZones with daylightOffset * would be to specify a environmnet variable with TimeZone definition including daylight adjustmnet rules. * A list of rules for your zone could be obtained from https://github.com/esp8266/Arduino/blob/master/cores/esp8266/TZ.h */ //configTzTime(time_zone, ntpServer1, ntpServer2); //connect to WiFi Serial.printf("Connecting to %s ", ssid); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(" CONNECTED"); } void loop() { delay(5000); printLocalTime(); // it will take some time to sync time :) }

https://github.com/esp8266/Arduino http://arduino.esp8266.com/stable/package\_esp8266com\_index.json https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads

He meant the Arduino framework. There is an Arduino core for the ESP8266 so you can use Arduino’s IDE and libraries for the ESP with this core here

According to this link(https://github.com/esp8266/Arduino/issues/6174) WeMos can't receive broadcasts on SDK 2.2.1.

There are 2 ways to minimize power consumption while maintaining an active WiFi connection, but it's not a large power reduction for either mode. Look at Automatic Modem Sleep and Automatic Light Sleep here: https://github.com/esp8266/Arduino/tree/master/libraries/esp8266/examples/LowPowerDemo

That's the Arduino (Uno) library. If you've correctly installed the ESP8266 package then it should be 3.(something-ish) for the ESP8266 version of the WiFi library. Current is 3.1.1 for the core files, and the WiFi is part of the core libraries. If you have your compile options set for verbose then you should see it doesn't access that old Arduino WiFi library.

Seems it's expected https://github.com/esp8266/Arduino/issues/721