Voron-Extras VS Ellis-PIF-Profile

Look at the details! I can recommend Ellis PIF settings.

These are the Ellis print settings. These print settings are the result of ~2 years worth of meticulous work.

If you want real nice colors, Paramount 3D is the way to go. As far as settings go, I use slightly modified Ellis profiles. For ASA, I use my ABS profile but increase temps to 260.

Here's Ellis's guide which a lot of people follow:https://github.com/AndrewEllis93/Ellis-SuperSlicer-Profiles

But, it's Blasphamy to to tell someone to use SuperSlicer without also linking Ellis' PIF Tuning Guide, that also links to his SuperSlicer PIF Profiles.

There are a lot of things you can change, but I think one of the most important things is your start GCode. If Cura is re-homing the Z for instance and SS isn't, that could explain why your prints aren't sticking. Another thing you can do is to export a sliced gcode file from both and examine what happens before the printing starts to determine the delta. I personally use Ellis' PiF profiles with a couple modifications to the machine/extruder limits to fit my machine and my start/end gcode macros.

I'm using eSun ABS+ with the PIF_Standard.ini profile: https://github.com/AndrewEllis93/Ellis-PIF-Profile/blob/master/SuperSlicer/PIF_Standard.ini I've slightly modified extrusion multiplier etc. as per the guide but everything else is stock.

Then apply this to your printer: https://github.com/AndrewEllis93/Ellis-PIF-Profile

The Ellis-PIF-Profile is a pretty common starting point that a lot of us use but you'll still need to adjust a few things to work with your particular printer.