UnoJoy VS ArduinoJoystickLibrary

I am trying to make the arduino work as an Human Interface Device (HID) for a gaming steering wheel that I am trying to revive, so it would work as a plug and play gamepad. I am shorting the pins in red in this image. I found the Unojoy from their github page here, as far as I understood it is a commonly known library for this kind of project. My main problem with this project is to transform arduino input into game input, thats why I am using a library that should make the arduino pretend to be a gamepad or something of the kind.

I have an Arduino Mega set up with (UnojoyMegajoy)[https://github.com/AlanChatham/UnoJoy], it works pretty well.

There’s also the UnoJoy method, which involves reflashing the firmware on the Mega’s usb controller chip to act as a HID https://github.com/AlanChatham/UnoJoy

UnoJoy

I'm scratch building a dashboard for SnowRunner which I also hope to use for American Truck Simulator, Euro Truck Simulator, Construction Simulator, etc. My current proof of concept includes potentiometers and buttons connected to an Arduino Mega 2560 running UnoJoy over USB to Windows 10 to Toca Edit's X360ce.

I've never used it on console. The project seems abandonned but it was compatible with PS3 https://github.com/AlanChatham/UnoJoy

STEP 5: upload the code to the arduino, my code is: https://pastebin.com/SM1wJ5tk this code is based in UnoJoy project here: https://github.com/AlanChatham/UnoJoy

If it thinks it's an Uno, you can use UnoJoy. It's not quite as easy to use as guitar configurator and may require you to change some values in the code to match pins up

I'm at a good point with the code and the hardware, but I ran into this issue where the library says that you can define up to 2 hat switches, and I need to use both and here's the problem.

I have a project where I want to turn a hall sensor Apem joystick into a PTZ-controller in OBS to control cameras in a live stream. I am using this library: https://github.com/MHeironimus/ArduinoJoystickLibrary

I would use a joystick-library like https://github.com/MHeironimus/ArduinoJoystickLibrary

I used the joystick library for arduino https://github.com/MHeironimus/ArduinoJoystickLibrary. Very easy to code, especially following this video. You can also map other types, such as x, y, z axis, rudder, accelerator, plus buttons. I'm planning to add a TO/GA button and AP/ATHR disengage buttons.

Yep, my bad. I got confused with the numbers. Also, did some googling and from what I can see here even though you can map more than 32 buttons the default Windows joystick tester won't display them.

This example might help you get you started. You can't directly "assign" a pin to an axis with this library. However, you can approach it a couple different ways.