USBMap VS designare-z390-opencore-efi

If you are stuck with using macOS only, they recommend USBMap anyway -> https://github.com/corpnewt/USBMap

Download Python, and USBMap from https://github.com/corpnewt/USBMap

iMessage and FaceTime works as well as all of my USB ports since I've mapped them manually with USBMap linked here https://github.com/corpnewt/USBMap.

Just confirming that you have built a USBMap.kext? Per this guide?

https://github.com/corpnewt/USBMap is a reference for how to map USB. You can also read here https://www.tonymacx86.com/threads/pastrychefs-asus-rog-strix-z370-g-gaming-wi-fi-ac-build-w-i9-9900k-amd-6600-xt.239969/ (search: map) for details on the fact that the motherboard's M2 slot uses an internal USB2 port. If it's not mapped, no USB, no BT.

Mapped using the Corpnewt guide linked from Dortania guide

Not sure where I'm going wrong - I've updated to the latest version of OpenCore and I'm running just fine on Catalina. There are a few threads similar to this that recommend USB mapping, so I tried that, using the USBMap/Readme. It hasn't seemed to make a difference, unless I screwed up somewhere, but all my ports currently work fine. I have yet to try USBInjectAll.kext, as I do not currently need that to boot and use my USBs in Catalina, but that will probably be my next step.

Then I cannot get my USB ports to work properly. I'm trying to map them with USBMap but they only seem to recognise USB3 devices and not USB2. I have a USB3 disk that I have plugged into everything and it shows up in USBMap and IORegestryExplorer, but when I do the same with my USB2 keyboard, it doesn't find it at all.

Also, use this to map your USBs: https://github.com/corpnewt/USBMap

I have both Wifi and Bluetooth working on my z390 Designare. You'll need to install the Intel kexts and have the proper USB mapping. You can check my repo here for some details.

I have the same board and graphics card. I don't use the wifi but I have the internal Bluetooth working. You can grab the USB map kext on my Github repo

I pretty sure Monterey requires different Kexts for Ethernet on this board from either BigSur or Catalina. You can compare your EFI with mine here if you like.

Not absurd. It will work. You will need to make necessary EFI changes between computers but the OS install will not be affected. Keep track of SMBIOS and serial numbers as you move b/w devices. Also shameless plug for Github repo which may help get your EFI working.

I followed the OC guide but with no luck. After some headache I ended up taking EFI folders from these great guys because I have similar hardware: - https://github.com/baughmann/designaire-z390-intel-i9-9900k-opencore - https://github.com/joostiphone/Z390-Hackintosh-Joost

I tried some people git efi: 1. https://github.com/baughmann/designaire-z390-intel-i9-9900k-opencore 2. https://github.com/hamido/opencore-efi-asus-z390-h

Some people had similar freezes because of Bios f9j version. I just downgraded to check if any freezes will happen. Fingers crossed 🤞. https://github.com/baughmann/designaire-z390-intel-i9-9900k-opencore/issues/52