Sanguino
Arduino_Core_STM32
Sanguino | Arduino_Core_STM32 | |
---|---|---|
6 | 10 | |
178 | 2,642 | |
- | 1.2% | |
0.0 | 9.3 | |
8 months ago | 7 days ago | |
C | C | |
- | GNU General Public License v3.0 or later |
Stars - the number of stars that a project has on GitHub. Growth - month over month growth in stars.
Activity is a relative number indicating how actively a project is being developed. Recent commits have higher weight than older ones.
For example, an activity of 9.0 indicates that a project is amongst the top 10% of the most actively developed projects that we are tracking.
Sanguino
-
Trouble with burning Bootloader onto Creality V1.1.4 Board
The first time I programmed my v1.1.4 board, I set up an Arduino Uno to use as the programmer, in ArduinoIDE 1.8.9. Then I used the board manager to install https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json to the "Additional Boards Manager URLs" field as per the instructions at https://github.com/Lauszus/Sanguino/tree/master, and installed the bootloader. That was in early 2019, and I didn't have any problems, but I believe that later versions of ArduinoIDE 2.x may be slightly different. Maybe worth trying an older version?
- Help with Marlin 2.1.2 on my Sanguino ATmega1284P processor
-
Hot End Temp Issue
/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Sanguinololu board pin assignments */ /** * Rev B 26 DEC 2016 * * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition */ /** * A useable Arduino IDE extension (board manager) can be found at * https://github.com/Lauszus/Sanguino * * This extension has been tested on Arduino 1.6.12 & 1.8.0 * * Here's the JSON path: * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json * * When installing select 1.0.2 * * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. */ #define ALLOW_MEGA644P #include "env_validate.h" #ifndef BOARD_INFO_NAME #define BOARD_INFO_NAME "Sanguinololu <1.2" #endif // // Limit Switches // #define X_STOP_PIN 18 #define Y_STOP_PIN 19 #define Z_STOP_PIN 20 // // Steppers // #define X_STEP_PIN 15 #define X_DIR_PIN 21 #define Y_STEP_PIN 22 #define Y_DIR_PIN 23 #define Z_STEP_PIN 3 #define Z_DIR_PIN 2 #define E0_STEP_PIN 1 #define E0_DIR_PIN 0 // // Temperature Sensors // #define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) #define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) // // Heaters / Fans // #define HEATER_0_PIN 13 // (extruder) #if ENABLED(SANGUINOLOLU_V_1_2) #define HEATER_BED_PIN 12 // (bed) #define X_ENABLE_PIN 14 #define Y_ENABLE_PIN 14 #define Z_ENABLE_PIN 26 #define E0_ENABLE_PIN 14 #if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2) #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan #endif #else #define HEATER_BED_PIN 14 // (bed) #define X_ENABLE_PIN 4 #define Y_ENABLE_PIN 4 #define Z_ENABLE_PIN 4 #define E0_ENABLE_PIN 4 #endif #if !defined(FAN_PIN) && (MB(AZTEEG_X1, STB_11) || IS_MELZI) #define FAN_PIN 4 // Works for Panelolu2 too #endif
-
How to Upgrade stock CR10 V1 to Marlin 2.0
Grab the Sanguino Board plugin here - https://github.com/Lauszus/sanguino/zipball/master and extract to Desktop
- Do you know of any ATMegas with approximately 40 pins, that are programmable through the INO-language?
-
BLtouch Install
I believe it's the Sanguino 1284P. Have a look at the Github: https://github.com/Lauszus/Sanguino
Arduino_Core_STM32
-
What is the difference between between Arduino and STM32
There's nothing stopping Arduino releasing an STM32-based dev board - but they simply haven't yet, and there's stacks of stm32 boards around that you can add an Arduino support core for if you like.
-
From Arduino to STM32CubeIDE
https://github.com/stm32duino/Arduino_Core_STM32 look this
- RF module Fs1000A with Stm32
-
SKR Mini E3 V3 TFT35 Firmware Compiling Issue
It shows this https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip getting to 97% then skipping to the next unpacking, then it seems to fail thereafter.
- Arduino for STM32
- Wiring up a simple ST7789 to an F767ZI - or really any nucleo
-
STM Microcontrollers vs Arduino Microcontrollers
You can program an STM32 MCU with Arduino, just add the community developed board definitions and HAL to the Arduino IDE.
-
Are any of the components worth salvaging off these temp data loggers?
If the mcu disables itself after it's one use you could program it via arduino to reset it or give it a new purpose. Reprogramming the chip will likely be the best use, those components are only a few cents it's more effort than it's worth to save them. Repurposing the board is what I'd try to do, weather that's via replacing the stm32 or reprogramming it is up to you.
-
Stm32f103c8 bluepill hmc5883l compass problems
I am using the stm32duino core for the Arduino Ide (https://github.com/stm32duino/Arduino_Core_STM32). My settings are the following:
-
New Microcontroller launched by the R Pi foundation: Raspberry Pi PICO (4$)
(official Arduino HAL) STM32
What are some alternatives?
Marlin - Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
stm32-bootloader - Customizable Bootloader for STM32 microcontrollers. This example demonstrates how to perform in-application-programming of a firmware located on an external SD card with FAT32 file system.
Configurations - Configurations for Marlin Firmware
MCUDEV_DEVEBOX_F407VGT6 - MicroPython board definition for the MCUDev DevEBox STM32F407VGT6 board
arduino-esp32 - Arduino core for the ESP32
pico-examples
u8g2 - U8glib library for monochrome displays, version 2
FunctionGeneratorCortexM4_HW - A function generator powered by ARM Cortex M4
Arduino - Arduino IDE 1.x
Arduino_STM32 - Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards
Tasmota - Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
inkplate6 - Inkplate6 project with time, date, weather and upcoming Google calendar events