SDRPlusPlus VS librtlsdr

I'm using newest SDR++ nightly built. win x64. Anyone can resolve this problem? Mabye I'm not using the right driver for SDR++? If so where can I find the right one?

SDR++ from GitHub (https://github.com/AlexandreRouma/SDRPlusPlus) runs on M1

Ah, I see what you mean, it's been a while since I looked at their repo. They don't seem to have one for ubuntu jammy yet in their stable release branch. But they do have an ubuntu jammy one in their nightly builds https://github.com/AlexandreRouma/SDRPlusPlus/releases/tag/nightly. I did give it a go and it seems to work okay, but obviously you would need to try it more thoroughly than I have.

What incompatibility? Do you think that this code https://github.com/AlexandreRouma/SDRPlusPlus doesn't support ARM?

SDR++

Some software tips. There is a newer version of SDR++ that includes an IF filter for NOAA APT signals that should help improve things: https://github.com/AlexandreRouma/SDRPlusPlus/releases/tag/nightly That gives you a new checkbox under the Radio section called "IF Noise Reduction" with a dropdown to select the type of reduction (where you select 'NOAA APT'). You can also use the "Decimation" option in the Source section to give a bit better SNR. From what I've read you get a 3db reduction in noise every time you double the decimation level. If you can't get rid of the noise around 137.1MHz maybe try going for NOAA 15 or 18 since those are at higher frequencies, hopefully away from that noise.

Download the https://github.com/rtlsdrblog/rtl-sdr-blog or https://github.com/librtlsdr/librtlsdr version instead. Even try both, since there may be differences.

Give https://github.com/librtlsdr/librtlsdr a try?

I should have mentioned, I'm using this fork of the librtlsdr library, which contains a slightly different version of rtl_power with some extra features, and apparently the "-D" option is treated differently in the version I'm using. The forked version allows you to set a specific branch using the "-D" option, as described below:

There are a few variations of librtlsdr, f.e. this fork; https://github.com/librtlsdr/librtlsdr which adds features that aren't available in the version used in most Linux distributions. This adds some extra features and output that are really useful (most notably, regular output of max, min, mean power levels and noise floor). It also has some extra functions to fine tune signals.

Linux, librtlsdr and this port of DSD. FWIW, this port of DSD is newer and also has a Windows binary.

Next I moved onto try feeding the output of rtl_sdr (from https://github.com/librtlsdr/librtlsdr) to nrsc5 and that worked well!

You have an older librtlsdr; I'm using the GitHub version, which adds extra features; https://github.com/librtlsdr/librtlsdr

Thank you for your reply, I have tried it with the 'static' from the official GitHub https://github.com/librtlsdr/librtlsdr/releases , but the error remains? Do you mean an even newer version?

github.com/librtlsdr/librtlsdr may be worthy to check out.