NBA-scoreboard VS mlb-led-scoreboard

For those interested in MLB or NHL versions of something similar, it's not too difficult with a bit of Linux knowledge. I used the hardware the MLB version suggested and loaded both MLB and NHL software on my Pi to switch between the two. There are apparently Premier League, NBA and NFL versions as well though I've not yet tried either (I'll be trying NFL and Premier League in a few months though).

nba https://github.com/bder222/NBA-scoreboard

Here is an NBA scoreboard I made that runs on a 32x64 matrix. I’ve never tried to drive it from a zero, only from a 3b. You might be able to get the score board working on a zero since it’s fairly low overhead to run it. I think a few people have used it but I’d be happy to help troubleshoot just getting your board to display something, I’ve spent a decent amount of time messing around with the boards.

So this is the instructions for the scoreboard: https://github.com/MLB-LED-Scoreboard/mlb-led-scoreboard/wiki

First and foremost, thank you to Tommy Farley’s MLB LED Scoreboard Project for the inspiration + most of the code base. My brother and I have been wanting a CFB equivalent of this forever, so we decided to build our own using a Raspberry Pi Zero and a 32 * 64 LED Matrix. Here is a link to the video demo. If you just so happen to have the same equipment, great! Here is our GitHub repository with the code + instructions on making your own. We’re also looking to sell these in the future (once the semiconductor shortage has hopefully settled down)— if you’re interested please let us know! As always, feedback from you all is great appreciated on how we can make this better.

About $200 in parts, runs out of a Pi.

I help maintain the MLB LED scoreboard project and we don't recommend anything less than 5A for a single matrix, and you're running 6 of them. In fact, the tutorial you linked suggests that you are way underpowering your matrices: https://learn.adafruit.com/32x16-32x32-rgb-led-matrix/powering

quick paste of an old how to file i made however heres the github link gh

I bought the RGB matrix and Raspberry Pi and assembled it. Just followed the process here to get the software running - https://github.com/MLB-LED-Scoreboard/mlb-led-scoreboard

You can look at the code/follow steps to build one yourself here: https://github.com/MLB-LED-Scoreboard/mlb-led-scoreboard. It's pretty straight forward if you have a technical background but if not it might take you a bit to get up to speed with the raspberry pi.

It supports a bunch of different matrix sizes, requires no assembly, and is free, so developers of software like the MLB LED scoreboard don't have to set up and maintain physical hardware to maintain the project. Consumers of those types of projects get the same benefits so you can run the emulated version without needing to pick up a soldering iron.