MixedVR VS ReverbG2ConfigManager

regardless I downloaded OVR and space calibrator and followed the guide, a video, as well as checked the FAQ's and I am still unable to get this working.

My guide is constantly updated. Sometimes takes me a bit to update things (for example right now forcing the steamvr chaperone works a bit different and I’m currently working out the best way to have it work well again) but it will likely always bit more up to date than any videos… Which most of them out there skip some important steps and add others that are unnecessary.

You don’t need Bluetooth. The base stations don’t connect to the PC. Read the instructions: everything is there!

Ignore Bluetooth unavailable. That’s just looking for the Bluetooth in a vive or index. You don’t use Bluetooth with this setup at all, unless you install lighthouse keeper or something and that’s just for turning the lighthouses on and off. Follow the instructions which are the same whether you’re using knuckles controllers or just trackers :)

Generally, when persons are struggling with issues such as yours, I'll suggest they follow Pumpkin's guide to the letter - don't skip a single step and be sure to use SteamVR chaperone instead of WMR.

Refer to step 4 here. And a simple youtube video.

It can be found here (it’s also in the sticky guide in this sun though there are a few outdated things in there now. I really need to make a new one)

Here is a set up guide: https://github.com/PumkinSpice/MixedVR/wiki/MixedVR-CV1-Touch Note that the guide says you need to keep the CV1 headset moving to make it stay awake, but there is now a software tool that can keep it awake without movement: https://github.com/DeltaNeverUsed/ODTKRA

Cheapest thing to do is find a full CV1 kit! At least two cameras, 3-4 is better. https://github.com/PumkinSpice/MixedVR/wiki/MixedVR-CV1-Touch — this is a guide I wrote on it though it’s a little outdated (You can use an outside program to not have to keep the cv1 HMD moving as I understand it)

If you are talking about the Rift CV1 then yes it is possible, here is a guide: https://github.com/PumkinSpice/MixedVR/wiki/MixedVR-CV1-Touch Note that the guide says you need something to keep the CV1 headset moving to keep it awake, but there is now a software tool that can keep it awake without novement:

If you pair your index controllers to those, you can then just swap between your index and G2 without too much hassle (in the guide linked above, there’s a g2 config manager that makes it simple to swap) — but you should be able to get it all working with the index HMD as dongles too!

There’s also the G2 config manager which was still working as expected last I checked!

There’s a different script that you could have a look at — https://github.com/byancey/ReverbG2ConfigManager — it’s specific to G2 but if you’re feeling daring you can probably pull out just the room setup kill.

I've posted the ReverbG2ConfigManager.ahk script on GitHub if anyone is interested.