Mini-AfterSherpa VS P-REXZ

Does anyone have a mini-after-sherpa with a phaetus dragonfly 55W heater hotend config?

I printed a mini aftersherpa from the github and it says everything is 3010 and 3007 fans. There's also many different remixes, mods, adaptations, etc. of the mini-after-sherpa hotend fan-shroud thing...

There's this one which is popular but pretty much the same as stock just with the top cut off. https://github.com/PrintersForAnts/Mini-AfterSherpa

If you're dead set on changing things up, the two (relatively) minor mods I'd suggest are the Mini-AfterSherpa toolhead and ZeroPanels panel clips. These will save you from dealing with the hassle of assembling a Mini-AfterBurner (my least favorite thing about V0.1), and inserting a million captive nuts, respectively.

I used the mount from https://github.com/PrintersForAnts/Mini-AfterSherpa. It requires 5V, then the gpios on the pi. I ended up going with an MGN9C and mini sherpa. The weight seemed to cause a drop but didn't test after the MGN9C upgrade

Sherpa Mini Extruder from Fabreeko with 8GT motor and Mini Aftersherpa. I found this easier to service than the mini afterburner

MiniAfterSherpa Toolhead with Revo Micro

I'm not entirely sure I understand your question but https://github.com/PrintersForAnts/Mini-AfterSherpa might be the answer

In my opinion the Mini AB is terrible. I have the mosquito running with a Sherpa Mini extruder and cowling of my own design. But the mini after sherpa works ok. If you can't find another cowling that works, I could modify mine so it fits the larger mosquito. There are other designs out there like the V0VO

I did the AfterSherpa mod with a standard V6 and mini-Sherpa because:

The hardware is already released - https://github.com/Armchair-Engineering/P-REXZ -, it's the firmware that's still not public yet.

I've also got a round bed... (https://github.com/Armchair-Engineering/P-REXZ)

I randomly found it and I've done some work with subtractive/cnc so I thought a corexz printer would be really cool to run with a round-rotary bed... (like Open-5x or the inspiration for this kp3s halfwire build: ArmChairEngineering's P-REXZ printer.