LEDs-single-gpu-passthrough VS vfio

GitHub - ledisthebest/LEDs-single-gpu-passthrough: Single GPU passthrough guide - Arch

These are the two main resources I used to guide me: https://github.com/joeknock90/Single-GPU-Passthrough https://github.com/ledisthebest/LEDs-single-gpu-passthrough. After I completed all the steps required I am able to start the VM but my screen turns black and I get the following output on /var/log/libvirt/qemu/win10.log

sorry that took forever: https://github.com/ledisthebest/LEDs-single-gpu-passthrough

I was mainly following this guide to setup the VM and scripts: https://gitlab.com/Karuri/vfio

I've successfully set up single GPU passthrough as per https://gitlab.com/Karuri/vfio and https://github.com/joeknock90/Single-GPU-Passthrough .

- and a few other things mentioned here and here,

great thanks for the tip! havnt checked the logs for libvirt as i thought it was an osx issue. im using manjaro host, and have originally installed the vm using this https://github.com/foxlet/macOS-Simple-KVM, and this for the passthrough https://gitlab.com/Karuri/vfio

I used to have an RX580-based single GPU passthrough setup. You likely need the vendor reset module, since hot-plugging Polaris 10 GPUs is a bit buggy and can cause GPU lockups. It might also be worth dumping your GPU bios and configuring libvirt to use it so you get a visible boot screen (tool). I think I mostly followed this guide, however it hasn't been updated in quite a while it seems.

If you're up to the task you can follow this guide to get it working.

vfio-single-gpu-passthrough (this is for single gpu system, I link it for the section regarding hugepages, isolation, pinning & cpu governor which massively improved performance. It use script to dynamically run these only when you start a vm, so you can still use all of your cores when you stop the vm)