vfio VS single-gpu-passthrough

I was mainly following this guide to setup the VM and scripts: https://gitlab.com/Karuri/vfio

I've successfully set up single GPU passthrough as per https://gitlab.com/Karuri/vfio and https://github.com/joeknock90/Single-GPU-Passthrough .

- and a few other things mentioned here and here,

great thanks for the tip! havnt checked the logs for libvirt as i thought it was an osx issue. im using manjaro host, and have originally installed the vm using this https://github.com/foxlet/macOS-Simple-KVM, and this for the passthrough https://gitlab.com/Karuri/vfio

I used to have an RX580-based single GPU passthrough setup. You likely need the vendor reset module, since hot-plugging Polaris 10 GPUs is a bit buggy and can cause GPU lockups. It might also be worth dumping your GPU bios and configuring libvirt to use it so you get a visible boot screen (tool). I think I mostly followed this guide, however it hasn't been updated in quite a while it seems.

If you're up to the task you can follow this guide to get it working.

vfio-single-gpu-passthrough (this is for single gpu system, I link it for the section regarding hugepages, isolation, pinning & cpu governor which massively improved performance. It use script to dynamically run these only when you start a vm, so you can still use all of your cores when you stop the vm)

The main guides I have used are the bryansteiner guide, the risingprismtv guide and this Ubuntu 22.04 guide.

I am following this guide to achieve Single-GPU passthrough. I am stuck at step 5, because when I run the VM for the first time to install Windows, instead it shows me a black screen with "TianoCore" when I press a key to boot the CD-ROM drive.

Not long ago I setup single GPU pass through following the instructions the risingprism wiki (https://gitlab.com/risingprismtv/single-gpu-passthrough). This all went very smoothly and works great.

Try this one by rising prisim

Link: https://gitlab.com/risingprismtv/single-gpu-passthrough/-/issues/29

I just finished the coveted RisingPrism guide for Single GPU-Passthrough for a Windows 11 VM, and while I was successful for the most part, it wasn't entirely smooth.

Refer this guide https://gitlab.com/risingprismtv/single-gpu-passthrough/-/wikis/home for single gpu passthrough if ur concerned about gaming in linux

i basically followed this guide to a tee, and for some reason whenever i try booting into the VM, all i get is a black screen with my cursor. is there anything i can do to fix this?

Okay so issue, and how this all kind of ties together. I followed a siggle pass trough guide (https://gitlab.com/risingprismtv/single-gpu-passthrough/-/wikis/home) and I got the log which I replied to this comment which prompted me to do the ACS override pacth which didnt work and then I came here after I tried some other stuff. Back to the present I'm not sure how to fix this issue now (decided to restart over) , so in step 3 (IOMMU groups) It said to skip steps 8 and 9 if my devices were in 2 different groups, so i did, and now i get this.

I followed Risingprism's guide to Single GPU Passthrough. Currently though, disk usage is slow for me. The system often hangs when moving files around, and I can't move two files at the same time or else none of them get moved, I have to pause one.