KlipperScreen VS crowsnest

[server] host: 0.0.0.0 port: 7125 klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock [authorization] trusted_clients: 10.0.0.0/8 127.0.0.0/8 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 FE80::/10 ::1/128 cors_domains: *.lan *.local *://localhost *://localhost:* *://my.mainsail.xyz *://app.fluidd.xyz [octoprint_compat] [history] [update_manager] channel: dev refresh_interval: 168 [update_manager mainsail-config] type: git_repo primary_branch: master path: ~/mainsail-config origin: https://github.com/mainsail-crew/mainsail-config.git managed_services: klipper [update_manager mainsail] type: web channel: stable repo: mainsail-crew/mainsail path: ~/mainsail [update_manager crowsnest] type: git_repo path: ~/crowsnest origin: https://github.com/mainsail-crew/crowsnest.git install_script: tools/install.sh # Sonar update_manager entry [update_manager sonar] type: git_repo path: ~/sonar origin: https://github.com/mainsail-crew/sonar.git primary_branch: main managed_services: sonar install_script: tools/install.sh [update_manager timelapse] type: git_repo primary_branch: main path: ~/moonraker-timelapse origin: https://github.com/mainsail-crew/moonraker-timelapse.git managed_services: klipper moonraker [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh managed_services: KlipperScreen

The project I'm trying to run is this one: https://github.com/jordanruthe/KlipperScreen, it's a plugin for a 3D printing firmware, to have a screen connected to a raspberry where the firmware runs.

That sounds like a Klipperscreen bug. You should probably report it.

It won’t work (at least I don’t think it will) with the built in screen but you can alway setup Klipperscreen

cp sample-android-adb.sh launch_KlipperScreen.sh and there was no error viola! Follow by this line : chmod +x launch_KlipperScreen.sh  And the : sudo reboot Then go to moonraker and enter: under [authorization]trusted_clients:  127.0.0.1 And also add in moorraker update script: [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh hit save and reboot   Using pixel 2 us a touch screen! Everything is working fine so far!

Fluidd and Mainsail are frontends for Moonraker. Moonraker is an API server for Klipper. There are other frontends for Moonraker too, such as KlipperScreen.

git clone https://github.com/jordanruthe/KlipperScreen.git

Used: https://klipperscreen.readthedocs.io/en/latest/Installation/ and the following Github: https://github.com/jordanruthe/KlipperScreen

pi@mainsailos:~ $ git clone https://github.com/mainsail-crew/crowsnest.git

[server] host: 0.0.0.0 port: 7125 klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock [authorization] trusted_clients: 10.0.0.0/8 127.0.0.0/8 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 FE80::/10 ::1/128 cors_domains: *.lan *.local *://localhost *://localhost:* *://my.mainsail.xyz *://app.fluidd.xyz [octoprint_compat] [history] [update_manager] channel: dev refresh_interval: 168 [update_manager mainsail-config] type: git_repo primary_branch: master path: ~/mainsail-config origin: https://github.com/mainsail-crew/mainsail-config.git managed_services: klipper [update_manager mainsail] type: web channel: stable repo: mainsail-crew/mainsail path: ~/mainsail [update_manager crowsnest] type: git_repo path: ~/crowsnest origin: https://github.com/mainsail-crew/crowsnest.git install_script: tools/install.sh # Sonar update_manager entry [update_manager sonar] type: git_repo path: ~/sonar origin: https://github.com/mainsail-crew/sonar.git primary_branch: main managed_services: sonar install_script: tools/install.sh [update_manager timelapse] type: git_repo primary_branch: main path: ~/moonraker-timelapse origin: https://github.com/mainsail-crew/moonraker-timelapse.git managed_services: klipper moonraker [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh managed_services: KlipperScreen

I'm runnin Mainsail on a RPI4 for my 3D printer, and I connected a Logitech C920 camera which is streaming video on http:///webcam/?action=stream using Crowsnest

● crowsnest.service - crowsnest - Multi Webcam/Streamer Control Deamon Loaded: loaded (/etc/systemd/system/crowsnest.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Wed 2023-06-07 11:14:19 EDT; 51min ago Docs: https://github.com/mainsail-crew/crowsnest Process: 1988 ExecStart=/usr/local/bin/crowsnest $CROWSNEST_ARGS (code=exited, status=1/FAILURE) Main PID: 1988 (code=exited, status=1/FAILURE) CPU: 1.660s

Hello, thank you for looking into this for me. The 3d printer is running Tailscale on a Raspberry Pi. I’ve tried accessing the stream from both Windows computers and iOS. There are no error messages, just a black screen with a forever-spinning wheel. I can access the GUI, it’s just the video stream that is not going thru. I’m not sure if it uses multicast trafficking. I’m a newbie in these matters. The specific service involved is called Crowsnest. https://github.com/mainsail-crew/crowsnest

That resolved the issue for me. Issue thread: https://github.com/mainsail-crew/crowsnest/issues/112

You need to install crowsnest