KlipperScreen VS klipper

[server] host: 0.0.0.0 port: 7125 klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock [authorization] trusted_clients: 10.0.0.0/8 127.0.0.0/8 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 FE80::/10 ::1/128 cors_domains: *.lan *.local *://localhost *://localhost:* *://my.mainsail.xyz *://app.fluidd.xyz [octoprint_compat] [history] [update_manager] channel: dev refresh_interval: 168 [update_manager mainsail-config] type: git_repo primary_branch: master path: ~/mainsail-config origin: https://github.com/mainsail-crew/mainsail-config.git managed_services: klipper [update_manager mainsail] type: web channel: stable repo: mainsail-crew/mainsail path: ~/mainsail [update_manager crowsnest] type: git_repo path: ~/crowsnest origin: https://github.com/mainsail-crew/crowsnest.git install_script: tools/install.sh # Sonar update_manager entry [update_manager sonar] type: git_repo path: ~/sonar origin: https://github.com/mainsail-crew/sonar.git primary_branch: main managed_services: sonar install_script: tools/install.sh [update_manager timelapse] type: git_repo primary_branch: main path: ~/moonraker-timelapse origin: https://github.com/mainsail-crew/moonraker-timelapse.git managed_services: klipper moonraker [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh managed_services: KlipperScreen

The project I'm trying to run is this one: https://github.com/jordanruthe/KlipperScreen, it's a plugin for a 3D printing firmware, to have a screen connected to a raspberry where the firmware runs.

That sounds like a Klipperscreen bug. You should probably report it.

It won’t work (at least I don’t think it will) with the built in screen but you can alway setup Klipperscreen

cp sample-android-adb.sh launch_KlipperScreen.sh and there was no error viola! Follow by this line : chmod +x launch_KlipperScreen.sh  And the : sudo reboot Then go to moonraker and enter: under [authorization]trusted_clients:  127.0.0.1 And also add in moorraker update script: [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh hit save and reboot   Using pixel 2 us a touch screen! Everything is working fine so far!

Fluidd and Mainsail are frontends for Moonraker. Moonraker is an API server for Klipper. There are other frontends for Moonraker too, such as KlipperScreen.

git clone https://github.com/jordanruthe/KlipperScreen.git

Used: https://klipperscreen.readthedocs.io/en/latest/Installation/ and the following Github: https://github.com/jordanruthe/KlipperScreen

https://github.com/KevinOConnor/klipper/issues/2546 The official statement as of 2020 is that Klipper “doesn’t support touchscreens.” I’m guessing KlipperScreen was created in response to this.

# https://github.com/KevinOConnor/klipper/issues/1363

extruder confgig info https://github.com/KevinOConnor/klipper/blob/master/docs/Rotation_Distance.md

Have you tried the official sample config for that printer?

#Below Macro with credit to Hywel Martin #https://github.com/KevinOConnor/klipper/issues/1354

[stepper_x] step_pin: P2.2 dir_pin: !P2.6 enable_pin: !P2.1 microsteps: 16 rotation_distance: 39.900 endstop_pin: P1.29 position_endstop: 210 position_max: 210 homing_speed: 50 [tmc2209 stepper_x] uart_pin: P1.10 run_current: 1.200 hold_current: 0.950 # https://github.com/KevinOConnor/klipper/issues/1363 stealthchop_threshold: 500 [stepper_y] step_pin: P0.19 dir_pin: !P0.20 enable_pin: !P2.8 microsteps: 16 rotation_distance: 39.800 endstop_pin: P1.28 position_endstop: 210 position_max: 210 homing_speed: 50 [tmc2209 stepper_y] uart_pin: P1.9 run_current: 1.200 hold_current: 0.950 # https://github.com/KevinOConnor/klipper/issues/1363 stealthchop_threshold: 500 [stepper_z] step_pin: P0.22 dir_pin: !P2.11 enable_pin: !P0.21 microsteps: 16 #rotation_distance: 4.036 rotation_distance: 4 endstop_pin: P1.27 #position_endstop: 0.0 position_max: 300 position_min: -2 endstop_pin: probe:z_virtual_endstop [tmc2209 stepper_z] uart_pin: P1.8 run_current: 0.650 hold_current: 0.450 # https://github.com/KevinOConnor/klipper/issues/1363 stealthchop_threshold: 500 [extruder] step_pin: P2.13 dir_pin: P0.11 enable_pin: !P2.12 microsteps: 16 rotation_distance: 8.159 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: P2.7 sensor_type: EPCOS 100K B57560G104F sensor_pin: P0.24 control: pid pid_Kp: 29.144 pid_Ki: 1.633 pid_Kd: 130.057 min_temp: 0 max_temp: 260 [tmc2209 extruder] uart_pin: P1.4 run_current: 0.800 hold_current: 0.500 # https://github.com/KevinOConnor/klipper/issues/1363 stealthchop_threshold: 5000 #[extruder1] #step_pin: P1.15 #dir_pin: P1.14 #enable_pin: !P1.16 #heater_pin: P2.4 #sensor_pin: P0.23 #... [heater_bed] heater_pin: P2.5 sensor_type: EPCOS 100K B57560G104F sensor_pin: P0.25 #control: pid #pid_kp: 66.429 #pid_ki: 1.197 #pid_kd: 921.707 min_temp: 0 max_temp: 130 [fan] pin: P2.3 [mcu] serial: /dev/serial/by-id/usb-Klipper_lpc1769_23B00015871C4AAFEB597C5DC62000F5-if00 [printer] kinematics: cartesian max_velocity: 400 max_accel: 500 max_z_velocity: 10 max_z_accel: 100 [bltouch] sensor_pin: ^P0.10 control_pin: P2.0 x_offset: -55 y_offset: -19 #z_offset: 1.26 [safe_z_home] home_xy_position: 110, 110 # Change coordinates to the center of your print bed speed: 50 z_hop: 10 # Move up 10mm z_hop_speed: 5 [bed_mesh] horizontal_move_z: 5 mesh_min: 20, 20 mesh_max: 149, 180 probe_count: 5, 5 algorithm: bicubic [screws_tilt_adjust] screw1: 69, 48 screw1_name: front left screw screw2: 210, 48 screw2_name: front right screw screw3: 210, 210 screw3_name: rear right screw screw4: 69, 210 screw4_name: rear left screw ######################################## # EXP1 / EXP2 (display) pins ######################################## [board_pins] aliases: # EXP1 header EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=, EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>, # EXP2 header EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=, EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=, EXP2_10= # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0" # See the sample-lcd.cfg file for definitions of common LCD displays. #*# <---------------------- SAVE_CONFIG ----------------------> #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. #*# #*# [extruder] #*# #*# [heater_bed] #*# control = pid #*# pid_kp = 71.053 #*# pid_ki = 1.538 #*# pid_kd = 820.659 #*# #*# [bltouch] #*# z_offset = 0.932 #*# #*# [bed_mesh ender5] #*# version = 1 #*# points = #*# 0.079459, 0.211890, 0.307745, 0.279998, 0.272430 #*# 0.010090, 0.029009, 0.097116, 0.051711, 0.153873 #*# -0.055495, 0.138738, 0.187926, 0.142521, 0.156395 #*# -0.049189, -0.021441, 0.013874, 0.003784, 0.089549 #*# 0.017658, 0.185404, 0.214413, 0.216935, 0.171530 #*# tension = 0.2 #*# min_x = 20.0 #*# algo = bicubic #*# y_count = 5 #*# mesh_y_pps = 2 #*# min_y = 19.99 #*# x_count = 5 #*# max_y = 180.0 #*# mesh_x_pps = 2 #*# max_x = 149.0 #*# #*# [bed_mesh default] #*# version = 1 #*# points = #*# 0.050450, 0.163963, 0.248466, 0.184143, 0.166485 #*# 0.031531, 0.007568, 0.078198, -0.034054, 0.094594 #*# 0.002523, 0.156395, 0.182881, 0.112251, 0.110990 #*# 0.007568, 0.003784, 0.035315, -0.025225, 0.076936 #*# 0.094594, 0.230809, 0.245944, 0.210629, 0.169008 #*# tension = 0.2 #*# min_x = 20.0 #*# algo = bicubic #*# y_count = 5 #*# mesh_y_pps = 2 #*# min_y = 19.99 #*# x_count = 5 #*# max_y = 180.0 #*# mesh_x_pps = 2 #*# max_x = 149.0

Here's what I'm using for config right now, but I'm still tuning it, so YMMV. I based this on a combination of the generic-bigtreetech-skr-2.cfg and printer-creality-ender5plus-2019.cfg configs from the Klipper config repo.