JoystickGremlin VS dcs-input-command-injector

DCS Scratchpad, Open Kneeboard, Joystick Gremlin and HidHide, VoiceAttack, Tacview, and if I may self-promote for a moment, DCS AutoMate.

Easiest way to set it up quickly is to use this Tool to set up a base mappings file, from there you can edit it using this Guide. Joystick Gremlin is another great tool to get the most out of your hotas in any game. I find going hands-on-throttle-and-mouse a better approach for MW5 though, tracing lasers is a big part of using them and its hard to get that with a stick. as for VR as others have said VRWarrior to get started, along with Cockpit Glass, In the pit, and/or Immersive Cockpit will help with immersion, just be careful of mod conflicts.

Start at the Joystick Gremlin website and work on from there: https://whitemagic.github.io/JoystickGremlin/

Joystick Gremlin. Read how to set it all up along with Vjoy to make a Virtual Device. Once you set it up, everything should work normally.

I thought I'd found the key in this thread on the Github: https://github.com/WhiteMagic/JoystickGremlin/issues/76, but it doesn't seem to work (or I'm doing something wrong.)

Maybe software like Joystick Gremlin would do the trick.

Same here, it means I can switch between flying and racing by just selecting a different Joystick Gremlin profile. I use it to add a custom curve to the pedals (because the travel a little differently on mine) and to map them into a single new axis which I assign as rudder

Munkwolf's DCS Community Keybinds + Quaggles' DCS Input Command Injector

DCS Input Command Injector - https://github.com/Quaggles/dcs-input-command-injector

I'd like to know if the Program with the red lines (DCS? This? https://github.com/Quaggles/dcs-input-command-injector ) is using the raw gyro pitch/yaw/roll speed values or the quaternion. I suspect it's the latter but I'll look into it. I'd also be interested to know the same for the VSCView.

First mod is DCS Input Command Injector by Quaggles, which is a baseline requirement for the second mod, DCS Community Keybinds. Ever want to bind something in a module, and the devs never added it? Maybe you want the volume knobs to turn faster, or light knobs to turn slower? Someone has added it here!

you can use quaggles input command injector mod to be able to put custom keybinds into your saved games folder where they won't get overwritten by updates: https://github.com/Quaggles/dcs-input-command-injector

Try Quaggles's DCS Input Command Injector together with DCS Community Keybinds instead, maybe someone added the commands you need.

Regarding the Warthog on/off switches and DCS bindings, Warthog owners should probably have a look at Quaggle's DCS input injector and the DCS community bindings for an elegant solution that basically removes any limitation, without the need to run additional software while flying DCS.

Files in there are formatted for use with Quaggles command injector mod: https://github.com/Quaggles/dcs-input-command-injector/releases

I recommend using DCS-Input-Command-Injector mod https://github.com/Quaggles/dcs-input-command-injector that allows you to configure custom input commands inside your Saved Games/DCS/ folder instead of inside your game folder.

tldr about the project: Adds extra keybinds. Requires Quaggles mod.