HID_Buttons VS ArduinoJoystickLibrary

Make sure you have the Arduino Joystick library installed as well as, say, the HID_Buttons library.

You need status checks on all of your keyboard outputs, just like the nPressed values for the analog axes. You can create values for each input, but there are libraries that make it easier.

You can simplify the press/release logic by sticking that into a function, or better yet build a class to manage the output state. You could also use a library.

This (obviously) gets tedious. You can use various libraries to make your life easier:

I'm at a good point with the code and the hardware, but I ran into this issue where the library says that you can define up to 2 hat switches, and I need to use both and here's the problem.

I have a project where I want to turn a hall sensor Apem joystick into a PTZ-controller in OBS to control cameras in a live stream. I am using this library: https://github.com/MHeironimus/ArduinoJoystickLibrary

I would use a joystick-library like https://github.com/MHeironimus/ArduinoJoystickLibrary

I used the joystick library for arduino https://github.com/MHeironimus/ArduinoJoystickLibrary. Very easy to code, especially following this video. You can also map other types, such as x, y, z axis, rudder, accelerator, plus buttons. I'm planning to add a TO/GA button and AP/ATHR disengage buttons.

Yep, my bad. I got confused with the numbers. Also, did some googling and from what I can see here even though you can map more than 32 buttons the default Windows joystick tester won't display them.

This example might help you get you started. You can't directly "assign" a pin to an axis with this library. However, you can approach it a couple different ways.