FluiddPI VS KlipperScreen

Use a Pi if you can find one and do the same steps from above or use a pre-built image for the Pi like FluiddPI.

i used fluid 1.6 which can be found here https://github.com/fluidd-core/FluiddPI/releases

I 'm a noobie to RPi so I installed FluiddPi image on an SD card using Rufus -- need to tinker with anything on the RPi directly -- runs fine so far.

All else fails; start over by downloading the FluiddPi Raspberry Pi image zip file from here. FluiddPi v1.17.0

Mainsail looks nicer though... the only reason I went Fluidd over Mainsail is because FluiddPi was an easy route to trying Klipper. It's a Pi image with Klipper, Moonraker, and Fluidd pre-installed

Yes it would be the optimal way to setup Octoprint or finished Raspberry Images like FluiddPi or MainsailOS Octoprint is the „official“ base for Klipper though personally I never had a need for Octoprint Plug-ins and use FluiddPi since a year. Klipper has also its subreddit /r/Klippers

You need to get the latest fluiddPi. use this link https://github.com/cadriel/FluiddPI/releases/download/v1.16.2/fluiddpi-rpi-lite-v1.16.2.zip This will download the zip file that contains the Fluidd and Klipper software. Now follow the document and video to create a MicroSD card for the PI. The Pi is where Klipper/ fluidd runs. It does all of the work converting the Gcode and it then controls the printer board. Once you have the SD card created then you need to edit the fluiddpi-wpa-supplicant.txt file to enter your SSID and network password. This should get the Pi on your network. Re-read the instructions and see if this works.

[server] host: 0.0.0.0 port: 7125 klippy_uds_address: /home/biqu/printer_data/comms/klippy.sock [authorization] trusted_clients: 10.0.0.0/8 127.0.0.0/8 169.254.0.0/16 172.16.0.0/12 192.168.0.0/16 FE80::/10 ::1/128 cors_domains: *.lan *.local *://localhost *://localhost:* *://my.mainsail.xyz *://app.fluidd.xyz [octoprint_compat] [history] [update_manager] channel: dev refresh_interval: 168 [update_manager mainsail-config] type: git_repo primary_branch: master path: ~/mainsail-config origin: https://github.com/mainsail-crew/mainsail-config.git managed_services: klipper [update_manager mainsail] type: web channel: stable repo: mainsail-crew/mainsail path: ~/mainsail [update_manager crowsnest] type: git_repo path: ~/crowsnest origin: https://github.com/mainsail-crew/crowsnest.git install_script: tools/install.sh # Sonar update_manager entry [update_manager sonar] type: git_repo path: ~/sonar origin: https://github.com/mainsail-crew/sonar.git primary_branch: main managed_services: sonar install_script: tools/install.sh [update_manager timelapse] type: git_repo primary_branch: main path: ~/moonraker-timelapse origin: https://github.com/mainsail-crew/moonraker-timelapse.git managed_services: klipper moonraker [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh managed_services: KlipperScreen

The project I'm trying to run is this one: https://github.com/jordanruthe/KlipperScreen, it's a plugin for a 3D printing firmware, to have a screen connected to a raspberry where the firmware runs.

That sounds like a Klipperscreen bug. You should probably report it.

It won’t work (at least I don’t think it will) with the built in screen but you can alway setup Klipperscreen

cp sample-android-adb.sh launch_KlipperScreen.sh and there was no error viola! Follow by this line : chmod +x launch_KlipperScreen.sh  And the : sudo reboot Then go to moonraker and enter: under [authorization]trusted_clients:  127.0.0.1 And also add in moorraker update script: [update_manager KlipperScreen] type: git_repo path: ~/KlipperScreen origin: https://github.com/jordanruthe/KlipperScreen.git env: ~/.KlipperScreen-env/bin/python requirements: scripts/KlipperScreen-requirements.txt install_script: scripts/KlipperScreen-install.sh hit save and reboot   Using pixel 2 us a touch screen! Everything is working fine so far!

Fluidd and Mainsail are frontends for Moonraker. Moonraker is an API server for Klipper. There are other frontends for Moonraker too, such as KlipperScreen.

git clone https://github.com/jordanruthe/KlipperScreen.git

Used: https://klipperscreen.readthedocs.io/en/latest/Installation/ and the following Github: https://github.com/jordanruthe/KlipperScreen