ESP32Marauder VS esp32-wifi-penetration-tool

Have you looked thru here may be useful. Does this screenshot help?

You can flash the board via the flipper app, or with a pc. Check this out https://github.com/justcallmekoko/ESP32Marauder/wiki/installing-firmware-via-ota

but in release page https://github.com/justcallmekoko/ESP32Marauder/releases/tag/v0.10.8 there is only firmware esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin

The WiFi marauder CAN connect to an access point and be part of same network as the victim. With some arp spoofing/poisoning you can pull off a basic MITM atk and save the traffic to the flipper SD card. Maybe even print it on the screen to show the audience in real time.

Is this what you need? https://github.com/justcallmekoko/ESP32Marauder/wiki/flipper-zero

Here we have the GitHub wiki made by said author with a pretty in-depth walk-through

There's also nrf24 modules you van use. And you can just use anything for the esp32, like marauder or wifi pentest tool.

Getting the ESP32 to send deauthentication frames has been on my radar for quite some time now. I started designing and producing the Marauder not realizing the ESP32 was incapable of sending deauth frames due to the limitations enforced by Espressif in their IDF. Thankfully DonBrus and tobozo tested my capabilities and questioned my methods. They led me to this repo on github. Within the source of the repo, there is a bypass of ieee80211_raw_frame_sanity_check which allows the ESP32 to send frames originally not permitted by the ESP-IDF using that very method. According to the repo documentation, this bypass was only tested in ESP-IDF version 4.1 5ef1b390026270503634ac3ec9f1ec2e364e23b2.