ComputerControl VS joycontrol

It's Pokémon Automaion and it's really cool. Because of it I've been able to farm Tera raids for even better rewards. Fairly easy and cheap to setup as well.

If you are still into automating I'd like to point you to https://github.com/PokemonAutomation/ComputerControl . Using microcontrollers to control inputs and a lot of programs for all 3 (not lets go) switch games.

I use an arduino with Pokemon Automation but if you have a modded switch like you mentioned sysbot is probably better. Both just input buttons automatically and don't modify the game so they're legal fwiw. There's no RNGing statics like the Regis because of cryptosecure so SR is only way.

If at one point you want to relive some stress, check this out (it’s free, just requires some hardware): https://github.com/PokemonAutomation/ComputerControl

You may want to check out the EggAutonomous script from the PokemonAutomation project

Hardware setup tutorial: https://github.com/PokemonAutomation/ComputerControl/blob/master/Wiki/Hardware/README.md

https://github.com/PokemonAutomation/ComputerControl/blob/master/Wiki/Programs/README.md This one most of the programs for bdsp require a USB serial adapter and a capture card connected to your PC so it can see what's happening on screen. And jumper leads to connect the USB serial adapter to the micro controller.

I linked the wrong fork 🤦‍♂️ Here you go.

joycontrol (specifically, Poohl/joycontrol for amiibo) is a program that can run on a raspberry pi 3B or higher (or VERY FEW computers with certain bluetooth chips) that emulates a controller over bluetooth. the github page should tell you everything you need to set it up / fix any errors.

¹I was actually running a fork of it that also had the capability to emulate amiibos but both repos should work fine on a raspberry Pi or an old Bluetooth capable laptop running Ubuntu/linux

You can find full Splatoon sets for maybe 20 USD but I use my PC and a software https://github.com/Poohl/joycontrol

Took about a week, of cycling through mugen recollection on auto (62 times atm). Did this manually at first, but then ended up emulating the switch controller on PC to automate this (tools for emulation are not written by me, and can be found here).

This fork of Joycontrol should be able to be used to scan amiibo files from online (not sure if I can link without breaking rules), but you need a Linux device with Bluetooth to use it

Just follow the instruction from here

I was able to use this to spoof amiibos with a raspberry pi 3 b+ but it should work on any Linux machine with bluetooth

P.S.: the original version of the [Linux] program referred to in the guide/video, JoyControl no longer works. Install this fork instead: https://github.com/Poohl/joycontrol