ArtnetWifi VS artnetESP32

ArtnetWifi being one of the most used, you can see that it combines universe byte and subnet byte here

it requires artnetwifi v1.4, esp-dmx v1.1.3, wifimanager v1.12 and webserver latest version (same author from wifi manager)

Here's what I use for ArtNet over WIFI to WeMos d1 mini (esp8266): https://github.com/rstephan/ArtnetWifi

I have an esp32, with a WS2812 panel, 56X8, sending 3 universes using the example https://github.com/rstephan/ArtnetWifi/tree/master/examples/ArtnetWifiFastLED, I did the mapping in Resolume Arena and it works correctly, however I tried Lumikit SHOW in another software, and without success, each universe is one color, and pixels delayed, does anyone have any idea what it could be?

I used the example, https://github.com/rstephan/ArtnetWifi/blob/master/examples/ArtnetWifiFastLED/ArtnetWifiFastLED.ino, however each universe is one color and is not synchronized, I use the Lumikit Show software, it interprets 512 channels , but I get 510 and it just doesn't do anything with channels 511 and 512, and I wanted it to send 512, would there be any way to change this in the code? Or just messing with the library? because 512 / 3 = 170.6666 pixels and the library does not interpret the 0.6666, and the program keeps giving this error with 510 channels. Any solution?

if you use https://github.com/hpwit/artnetESP32 you should be able to drive 600 leds like a breeze. But you have to know that the fastest the display the better results. What I mean is it is better to split your leds over several pins. In your case I would (if not done yet) split your leds over 2 pins. This juste change your fastled declaration.

good afternoon everyone, I'm using example https://github.com/hpwit/artnetESP32/blob/master/examples/exampleArtnet/exampleArtnet.ino, I'm manipulating 32 universes divided into 8 pins from my ESP32, but the software I'm using using (LUMIKIT SHOW), it recognizes channels 1 to 512, and the code sends channels 1 to 510, with that the software does not recognize channels 511 and 512 and the universes are separated, a universe of each color, does anyone know if would it be possible to change the channels that the code sends to the software?

I was thinking of using ESP32 instead of the fadecandy, with 15 output pins to drive the leds. I'm not sure how to send the led info, maybe with /u/Yves-bazin 's library artnetESP32 ?

You can use ArtNet to send the data over Wifi to the controllers. The ESP32 ran on the artnetESP32 library by hpwit (https://github.com/hpwit/artnetESP32)