ArtNet VS artnetESP32

This library specifically supports ethernet https://github.com/hideakitai/ArtNet

Did you try this one? https://github.com/hideakitai/ArtNet/blob/master/examples/Ethernet/receive_fastled/receive_fastled.ino

Then if you can use artnet you should check this library : https://github.com/hideakitai/ArtNet It has a function for directly send data to leds.

if you use https://github.com/hpwit/artnetESP32 you should be able to drive 600 leds like a breeze. But you have to know that the fastest the display the better results. What I mean is it is better to split your leds over several pins. In your case I would (if not done yet) split your leds over 2 pins. This juste change your fastled declaration.

good afternoon everyone, I'm using example https://github.com/hpwit/artnetESP32/blob/master/examples/exampleArtnet/exampleArtnet.ino, I'm manipulating 32 universes divided into 8 pins from my ESP32, but the software I'm using using (LUMIKIT SHOW), it recognizes channels 1 to 512, and the code sends channels 1 to 510, with that the software does not recognize channels 511 and 512 and the universes are separated, a universe of each color, does anyone know if would it be possible to change the channels that the code sends to the software?

I was thinking of using ESP32 instead of the fadecandy, with 15 output pins to drive the leds. I'm not sure how to send the led info, maybe with /u/Yves-bazin 's library artnetESP32 ?

You can use ArtNet to send the data over Wifi to the controllers. The ESP32 ran on the artnetESP32 library by hpwit (https://github.com/hpwit/artnetESP32)