Arduino_Core_STM32 VS pico-examples

There's nothing stopping Arduino releasing an STM32-based dev board - but they simply haven't yet, and there's stacks of stm32 boards around that you can add an Arduino support core for if you like.

https://github.com/stm32duino/Arduino_Core_STM32 look this

It shows this https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip getting to 97% then skipping to the next unpacking, then it seems to fail thereafter.

You can program an STM32 MCU with Arduino, just add the community developed board definitions and HAL to the Arduino IDE.

If the mcu disables itself after it's one use you could program it via arduino to reset it or give it a new purpose. Reprogramming the chip will likely be the best use, those components are only a few cents it's more effort than it's worth to save them. Repurposing the board is what I'd try to do, weather that's via replacing the stm32 or reprogramming it is up to you.

I am using the stm32duino core for the Arduino Ide (https://github.com/stm32duino/Arduino_Core_STM32). My settings are the following:

(official Arduino HAL) STM32

Navigate to the Pico Examples repository.

I'm experimenting with the "pico/wifi/tcp_server/". It works as expected with a WPA2 secured network, however I can't figure out how to access a WP3 secured network. According to the Pico W datasheet the device supports WPA3. However the function cyw43_arch_wifi_connect_async doesn't seem to have the option to select WPA3. The supported options are CYW43_AUTH_WPA_TKIP_PSK, CYW43_AUTH_WPA2_AES_PSK, or CYW43_AUTH_WPA2_MIXED_PSK.

I connected the MPU6050 and Pico as shown in the wiring guide for the example code here and have also tried using a level shifter with this wiring setup.

https://github.com/raspberrypi/pico-sdk/ links to a PDF about connecting to the interwebs with a pi pico.

micropython/micropython//ports/rp2/boards/RPI_PICO_W: https://github.com/micropython/micropython/tree/master/ports...

raspberrypi/pico-sdk /lib: btstack, cyw43-driver, lwip, mbedtls, tinyusb https://github.com/raspberrypi/pico-sdk/tree/master/lib

raspberrypi/pico-examples//pico_w/wifi/access_point/picow_access_point.c:

https://github.com/raspberrypi/pico-examples/blob/master/pic...

There's an iperf opkg pkg, or is it just netperf (which works with fluent)?

raspberrypi/pico-examples//pico_w/wifi/iperf/picow_iperf.c:

Okay I abandoned both of those libraries and tried the simpler WS2812 example in the Pico SDK and I did get it working....finally.

For C++, you could look at the pico-examples on Github https://github.com/raspberrypi/pico-examples

I don't know what you mean. There are dozens of tutorials on the frontpage of google. And just straight up a bt folder of projects for the pico w in the rpi github at https://github.com/raspberrypi/pico-examples/tree/master/pico_w/bt. have you tried that? If you haven't, then you need to work on learning how to use google because people aren't here to do work for you. If you have tried this and it didn't work then reread my previous post and ask better questions.

I'm sorry I don't use the pico-sdk so I'm not 100% sure of which method it'd be. A short lookup in the pico-examples repository brought me to this.

The LED is controlled by a GPIO pin on the radio, not the RP2040. See https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/blink/picow_blink.c.