uf2 VS uf2-samdx1

And the UF2 reference from Microsoft: https://github.com/microsoft/uf2/blob/master/README.md

I'm compiling a very stripped down example from https://github.com/embassy-rs/nrf-softdevice that should just loop forever and turn an LED on and off. I convert from a binary to the uf2 using this script linked in the adafruit bootloader repository. The command I run is uf2conv.py -c -b 0x26000 -f 0xADA52840. When running file on my binary the output is UF2 firmware image, family Nordic NRF52840, address 0x026000, 42 total blocks, exactly the same as on the ZMK image that works without a problem.

How can I (someone with no electronics or programming experience) configure my own layout using QMK Config and then compile it into a .uf2 file that works on the Sea-Picro with my Ferris Sweep?

In case you haven't seen the UF2 file format, it's specifically designed to be robust w.r.t ensuring that the content makes it to the target intact despite common OS quirks.

https://github.com/microsoft/uf2

  - Data is divided into 512 byte blocks, which lines up with the mass storage transfer size.

The bootloader uses the UF2 protocol, which is cleverly designed to allow "drag and drop" flashing over USB mass storage.

I'd strongly recommend using an application-specific USB bootloader if possible. The UF2 firmware update protocol is particularly slick, as it allows users to upload new firmware over USB mass storage and requires no staging space; if using this is an option, I'd go for it.

The mentioned UF2 standard (UF2 - mdf5 checksum) actually offers the option to specifiy an MD5 checksum. Which is heavier on resources.

1) Get https://www.adafruit.com/product/3500 Instantly start controlling built-in RGB LED, and LED strips with basically no programming. 2) Stop playing with Python, that won't get you anywhere close to where you want. Switch over to Arduino and learn C++. 3) Understand the bootloader code https://github.com/Microsoft/uf2-samdx1 - then write an app to allow R/W blocks on built-in flash, while also playing with LEDs. 4) Since it only has 256K flash, you'll need to hook up some flash chips if you want more space. (Too many types to list, depends on your cost vs speed trade-offs.)