udpih VS Bloopair

Prepare UDPIH. Don't forget to setup wifi/ethernet

No, you can just put recovery software on the Pi/Switch and plug it into the Wii U during boot and it can open a recovery menu. https://github.com/GaryOderNichts/udpih. No soldering needed.

REMOVE CBHC FIRST! If you don't the 8GB Wii U will BRICK after the transfer. The only way to recover this brick is with udpih and recovery menu!

Okay, so, from the description you're giving, there's definitely some sort of serious problem here. Most likely some kind of console side brick, unfortunately. If you have the correct hardware, you can try to diagnose it and maybe even repair it using udpih, but if not, you're probably out of luck.

That will only help if, for example, your coldboot title is set to one that isn't available (for example, if you remove the injected CBHC app). But anyway: https://github.com/GaryOderNichts/udpih

My Wii U is stock, I just used this tool to check it. https://github.com/GaryOderNichts/udpih

Theres already a solution. https://github.com/GaryOderNichts/udpih

https://github.com/GaryOderNichts/recovery_menu/releases https://github.com/GaryOderNichts/udpih/releases https://github.com/GaryOderNichts/udpih

Not worth it. If you have a modded Wii U, bloopair is worth trying: https://github.com/GaryOderNichts/Bloopair

https://gbatemp.net/threads/hid-to-vpad.424127/ might let you use the GC adapter and real GC controller. Otherwise you could use one of the GC-shaped Switch pro controllers with https://github.com/GaryOderNichts/Bloopair

I had the exact same problem, still don’t know how to make it work, but maybe for you it will work if you download the latest version of the Bloopair on GitHub maybe it'll work to you =)

You need amodded Wii U, but Bloopair supports this. afaik there is no other way.

Personally, I think all of the “pro” necessary is available with https://wiiu.hacks.guide/#/ and a 500GB Seagate SSD. The SSD draws far less power than an external HDD, so a USB-Y cable is unnecessary. I have a Custom Firmware (CFW) Wii U and it, the OEM GameCube adapter, a few Wii U Pro Controllers, and the most recent release of Bloopair (https://github.com/GaryOderNichts/Bloopair) and one is in business for a very exiting and Pro Wii U gaming experience!

Solution-- use bloopair. Bloopair lets you use almost any controller wirelessly (including the switch pro controller), so HID to VPAD is a bit outdated now. If you have tiramisu, then install the tiramisu version here (This is the current version as of writing. Clicking on the link will automatically start downloading bloopair). But if you don't have tiramisu, you can manually install the legacy version here (This will probably always be the latest version because it's unsupported as of ver. 0.51. Clicking on the link will immediately install bloopair to your computer). I gave direct links for manual installation, but if you have the Homebrew AppStore then you can grab them there.

I have the same controller, and it worked with Bloopair, with an unofficial (yet) version. I followed this thread: https://github.com/GaryOderNichts/Bloopair/issues/56